- Never seen this method before...
- 2nd tranny in a week on same track.
- Brake line completely burst. Brake fluid everywhere.
- C’mon man.
- He warned you at least
- Please help i cant get this bolt off for the sway bar link. I sawed the other end off but now the bolt is just cut off and cant grab on to it with nothing. I dont have a torch strong enough to heat the bolt and break it off
- Not our usual work cat...
- Am I a terrible person for being so happy about this being someone elses problem?
- Question about tire deformation
- Damn stowaways!
- Went to the junkyard here in California and here is another load of perfectly good TDI V dubs on the way to be crushed, what a waste!
- Moving day is always a very dangerous day.
- More carnage from previous tech installing cam in Volvo D13. Exhaust bridge was ON TOP of valve stem, not over it.
- Looks like its about time to replace this body mount...
- Our gate to the garden
- This is why you dont stop in the cross walk. Needless to say she glared at him
- Wtf is this bull
- I found one
- Customer had this towed in for crank no start. Acted surprised when I brought up the leaking caliper and bad brakes.
- CS grinding noise when driving.
- Saw this in the parking lot in front of a nearby shop, but I dont think it rolled there
- customer didnt mention an overheating issue...
- LED Headlight. Can it start a fire?
- Fixed!
- 07 Honda Civic what’s going on?
- As someone who travels back and forth from the GW bridge a lot, constantly seeing people like him standing in the middle of the highway, endagering his life and others dumbfounds me
- Im going to hell for this one.
- Chevy C10 PS Leak
- Found this bad boy out in the wild yesterday. Perfect way to tow a vehicle.
- C/s The car is very bouncy in the left rear.
- Today on This Totaled a: BMW 650i
- Car tire after running over a spike strip
- (2003 KTM 450exc) RFS short screen hex plug stripped to shit on this new 450EXC I just bought... how the hell do I get this thing out
- Its still holding air, can it make it to Portland for my delivery?
- 2017 Maserati owner refused to buy new rear tyres and insists on driving it away
- An absurdly large gear
- Newer Jetta towed in with a snapped rear control arm. Looks like a really clean cut to me.
- What grinding?
- I am 40 years old. I just now learned there is a little slot in your gas cover to hold your gas cap when you refill.
- Handicap twofor+1, walked my dog to the store this morning, saw this guy scoring a hat-trick. Blocking ramp, H parking spot, and an unmarked spot.
- Cs/ I dont want new tires
- Two trucks at same slow speed
- This repurposed pool
- I uh.. well.. um...
- My turn to brag on my Craigslist steal. 175bf of Walnut and 150+bf of cherry for $200. What would you make out of all this?
- coolant froze
- It was only supposed to be a quick brake change. Both brake saddles turned out to be stuck from the generated heat and needed to be replaced.
- Whats wrong with this picture?
- Rolled into the shop a little off.
- People who park like this
- Golf Cart Bodies
- classy fender flare
- I guess you could do that
- And the customer was wondering why his bead keeps leaking...
- Car
- He was just in for a rotate! 😱😱. Pic of wheel choice in comments
- C/S NOX sensors replaced at third party, CEL did not go away
- Thats not normal
- Is this right? Im almost done with a motor swap and the headers i bought are not stock. Im not sure at all how these spring bolts are supposed to go on but this was my guess and Im trying to make sure before i put the bottom support back in place.
- How clean the break is on our basketball hoop from the combination of today’s severe wind gusts and years of rusting.
- Why must i take this on a test drive?! Smells just as bad as it looks.
- My Jack paying respects to a broken 0 lug nut. Unfortunately my own.
- Something here isnt right
- Bushings who?
- Its a custom mod.
- Customer (another dealer) says long crank/ no start. I wonder why.
- Couldve at least used a bendy straw
- A hot day in Saudi.
- Who installed these? 😂
- When a proper car lift wont do
- What is this? 94 Vortec 4.3l engine
- How many clamps do you need? ALL the clamps.
- 747 Tire Change
- car keeps shutting off found a hole burnt into the ECM case.
- Thats a new one...
- Not the usual rice you see here but still pretty shitty
- Actually drove this one into the shop
- Its cool theyre strapped down.
- back to work after 1 month !! For the pipe its a 4ich 10s last pass with 120 amps
- Blursed Mater ...
- My 1999 Jeep Grand Cherokee was knocking and unsure why, I think I found the problem. Pushrod came out of the rocker. I’m not sure if this fixed it or not, I’ll update once I’m done.
- Yes, let’s take up 2 handicap spots
- Truck, towing an SUV, towing a trailer.
- Ford 351m engine. What is this little tube that runs from the carb to a plate on the intake? Its rusted and gone away. It come from the carb where the round thing says lean
- Cars and Accessories
- Alway lock on the inside and yes he fucked up his bumper a bit
- Hella Twisted
- Xpost from /r/AirForce, guy had tread separate, pulled over and found vehicle ops had provided this spare
- Single digit license plate
- This bolt with a castle nut has a smaller bolt with a smaller castle nut/cotter pin holding it in place.
- Whoever did these suspension mods sure has a lot of balls.
- Safety Fail
- Boss- How close are you to loosing your shit?
- Sure you can WASH your Range Rover with a hose on the inside!
- C/s possible driveshaft issue.
- A tow truck towing a tow truck towing a tow truck
- I got this out of a pump I rebuilt yesterday, it never failed.
- Just started making a noise yesterday!
- Caught my coworkers doing the dumbest s**t Ive ever seen. Closed ladder on top of a semi tanker. Btw, whats a harness?
- You gotta keep em separated .
- A tiny upward growing icicle. In the middle of a taxiway.
- When the truck has been in the shop too long
- Theyll be back...
- Customer states oil leaking, but claims they didnt hit anything. So long transfer case 👋
- TGV (train) hit something at 300km/h. Not disclosed to me what it hit. But there are e few antennas missing... (all attached to the under tray, which is missing)
- My parents disapprove, but I finally did it!
- Thieves who do THIS shoot...
- People on here be like how long do I have before I need to replace this?
- Readily accessible
- Got those high performance drums.
- Jeep Rose
- use your...imagination
- GM quality for you
- You might want to consider an alignment check...
- Shout out to you FCA for the best lug nuts in the industry and the tire monkey who torqued these to spec....
- Now Im no expert, but Im pretty damn sure tyres are not held together with screws...
- Moving day
- So steel stitches are a thing?
- It would be great if someone sold boots with metal heel covers to save big feet having idiots like myself.
- How do you even roll a car like this?
- trucks towing each other
- To all of my southern state dwelling Wrench turners....I hate you all so much (details in comments)
- Replacing an old radiator. Took off all the hoses and 2 of the small bottom hoses had what looked like watery oil leak out. Is that normal?
- What to do when you have alloy wheels, but really lime the look of those plastic wheel covers....oh, dont bother clipping the zip ties.
- This was a little unsettling
- Those wheels... Why? Just why? The spacers had to be about 4 thick
- I rode on a recently-milled road yesterday, now my headers and engine are covered in a gritty, baked-on layer of asphalt. Help?
- If the customer wants a tire rotation, my response would be could you fucking not
- When an oil filter is too stubborn for even a screwdriver...
- 1996 Toyota Celica AZ-FE 1.8l Connects to the air box and the throttle body. Anyone know the name and where i could buy one? Current is dry rotted and afraid to break it when i clean the throttle body as it has a 3 hour drive up north here soon. Thanks
- Top quality jack stands
- Not much is rolling in today...
- A mom and 4 kids got out of this..
- Blursed truck exhaust shape
- My tire popped 10 miles out so I had to bike on this the rest of the way
- C/S his car was stolen and doesnt know how it happened
- On todays episode of wow thats f$#@ed up
- What does this pattern on my front disc mean?
- Repurposed two sets of SALE lettering..
- ...ding-a-ding dang my dang-along...
- Was still spinning while cutting a hole into the timing cover
- My steering doesnt work!
- The water stains on the bottom part of this boat being hauled look like a distant painting of a farm and field.
- Plllllpppppppptttt
- Cabin air filter housing almost packed full... The a/c worked just fine somehow
- Just put new turf tires on the lawn mower.
- What causes rotor & pad streaks?
- Whats up with these two trends
- Why are my front sway bar links at different angles on my 2004 WRX? Is this an alignment issue?
- I guess it wont slip sideways
- What entrance to a car carrier from the loading door looks like
- When the bead is reeealy stuck.
- Blursed Trailer
- Might as well go home. Nothing rolling in today.
- Self-aware?
- I built an ugly but sturdy bike repair stand from scrap, leftover lumber. More pics in comments
- Right on the edge
- Found the leak!
- What happened to this railing
- Question about estop cable wired normally open.
- Missed the truck
- Customer wasnt sure why the fill neck blew off the radiator
- 5 decades later, this is still intimidating to see behind you
- This socket
- Get nuts
- Does the pintle cap matter? These injectors are the same, but the pintle is different. The cone shaped one is from the old set. These are going into a ln 06 G6 GT.
- “Two post auto lift”
- Bent rim. Replace immediately?
- Are these brake pads ready to go? 2002 Ford Focus
- *Update on the ladder.* They had to buy me a new one because it accidentally fell under my truck while I was pulling out one day.
- Anyone missing their flathead???
- Trash truck forks wont move, let me get up there and check that
- Samsung apparently makes excavators.
- Open bay netting. Whats that?
- Loved looking down at Vanny DeVito from the top of the first pitch
- We tried selling an alignment twice to this customer, and they declined, but 3rd times the charm.
- The smoothness of this tire...
- Trailer Off road
- Truck bed shed
- These fetishes are getting out of control
- Prop shaft wanted some space to run around.
- I’m about to do my front brakes, anything I can do about this while I’m down there? Been driving on it being all black for a while, the liquid dripping from it is pretty clean
- This guy thats watching tv while driving
- Monster Energy hubcaps
- The impact streaks on this old forklift
- After the 5th time my door handle broke on my 00 GMC3500 I did some farmer engineering and made a better one out of Poly
- Seen at the Grocery Store
- Hope nobody needs to charge the riding jack. Right under the safety poster.
- Day in the life of a tire tech
- Alan Club: Strength (+2), Agility (-1) Special move (Knock back, Stun)
- How do i clean this? Any ideas?
- C/S Loud noise when going over bumps
- I mean idk how well it works, if at all
- 07 MKX: Rotor damage should I replace?
- Can anyone tell me what this broken cover on the top of my engine is called. 2000 Jeep wrangler 4.0
- Same size as the owners
- well, it kinda works ¯\_(ツ)_/¯
- Someone thinks hes in a chariot race
- We found a new way to get the runflat inside of a tire today.
- Found the source of the noise I get whenever I turn left hard 😅. Thankfully screws are a way weaker metal than chains.
- Rear original tires, 2006 Corvette that was traded in.
- What do you mean you cant replace my back window?
- I ride my bike so much that I eroded a hole through my tire
- That limited edition CERLT
- When COVID gives you too much free time and a $1200 budget.
- For those who asked what can happen when the neck is not secured right. This is a smaller roll that completely broke you can see the inside of the neck on the right.
- I wish the person who did the tie-down did the hitch.
- A disk attached to the wheel hub of a late model white Ram pickup. It has a rod supporting a cable connected to a bed mounted tool box. There is also a white box mounted under the truck, forward of the rear wheel, which looks like ir could be related.
- Just buffed my 1963 Plymouth valiant today. Back half is buffed and waxed front half is just washed. Not too bad for sitting under a tree for 30+ years
- Down to the steel wear indicator
- C/S doesnt need new air filter.
- Ha, theyre at it again...
- Seems like itd be more effort to not put it away
- PsBattle: Jeep covered in white paint.
- A shorter ladder might allow for the required 4:1 ratio...
- Someone smashed the mirror off my car last night. Havent even owned it a month.
- Just towed into the lot. Theres a story here, but the driver speaks zero English so we may never know.
- So.... How did my tie rod end crack lengthwise?
- Heading to grandmothers?
- Got a roadcall today for a flat tire caused by tire. Its a tireception.
- URGENT ADVICE REQUIRED
- Day 3 at my new job. CS states odd purring like noise, please advise (being taken to a vet, alive and well)
- Any idea what it could be coming from. Looks like the hose to me from the spray pattern on the radiator
- Waste not want not.
- Car suspensions
- I was behind this guy for 2 miles. He flicked off 4 separate people.
- Street legal slick?
- Fuel delivery driver too lazy to hook up vapor recovery hose. Could smell the vapors a block away.
- Customer states tire keeps loosing air
- When it feels like your driving over a rumble strip and you cant see why...
- The cargo on this 18 wheeler
- How to repair a leaking valve stem.
- we maintain about 120 postal vehicles. all the drivers favorite line idk it just fell off
- Be sure you know which is the inside pad and which is the outside pad
- The new delivery guy showed up and pulled into the loading dock the wrong way and jack knifed the truck
- Didnt roll into the shop soon enough.
- Cant be bothered disassembling or masking.
- Maybe not quite OSHA, unless hes driving for work. But still...
- C/S: DS/R wheel locking up and grinding when braking.
- It may be minor, but I completed my first mechanical repair by myself today. Replaced my own shift lever :D
- Now Im no expert, but I dont think that should be there.
- These ginormous tires bigger than the semi theyre being transported on
- Heres how the new guy leaves his floorjack. His bay is right next to the bathroom. Id love to hear your FNG stories.
- 600 miles on the build and a knocking noise develops. Guess I did something wrong.
- Recently a truck rolled over here and took out a traffic light. They put up a temporary light so that it could still be used when the rebuild it.
- Just..wow
- But how tho
- Is this crank bolt reverse thread? 1995 honda civic, doing the timing belt and it doesnt seem to want to come off, just want to make sure before I give it a lot of uga duggas
- The shadow from my truck makes it look like a wind up toy.
- Are these ball joints?
- Had my Longboard for just over a year. Watch out for big cracks in trails.
- Its an important call, boss!
- Just DIDNT roll into the shop...
- It got warm then froze again, this truck is frozen in several inches of ice
- A little tight
- Bigger tires just seem to get nailed harder.
- Someone is about to get drug tested
- Tube socks axle tubes
- Anyone know what the little white box on the side of my fuse box is for? 2000 jeep wrangler 4.0
- This truck has a fishing pole for an antenna
- C/S tire has a slow leak... Somehow its still holding air!
- Customer: I think I have a nail in my tire, it keeps going flat. Me: Well the good news is your tire is fine, buuuuuut....
- Noticed the calipers are not centered after the shop replaced my chain and sprocket. Wrongly assembled?
- Who the fuck thinks its a good idea to design it so you have to remove a control arm to do brakes?
- That is not supposed to come out...
- Aint rolling anywhere...
- A sad moment...first day with the new tractor and I broke a tooth. I have a replacement coming from the dealer. But for future reference, anyone have a website or company they like to use for parts?
- The best type of headlights
- Sir, I dont think you wanna know what that noise was in your dash.
- Not exactly a car, but its being towed by one and fits the other criteria- so it counts.
- Lets play spot the brake pad!
- Bumper ahead of the drive Wheels on a city bus. Life-saving device?
- Exhaust leak from manifold. 72 jeep DJ-5. Rusted screws. Any way I can seal this up?
- Just rolled out of the shop. Ford dealership offered me a $4/hr pay hike. See ya firestone!
- Customer states there is a weird noise while driving.
- That was a big rock!
- My neighbor throwing all of his cigarette butts into our yard. I just threw them back into his driveway.
- Talento hay.. Solo falta apoyarlo
- An engineer that we dont have to kill in their sleep!
- That. Is a very well constructed pole. My driver is the reason why I would never want to be a fleet mechanic.
- NYE brings out the best in us all.
- One 3 inch nail and 5 plugs later. Nothing like plugging flat on a freeway shoulder in 100+ degree weather.
- C/S airline at rear of mixer not working
- Nah I dont do holeshots.
- Yeah, I see all that. Can you fix it or not?
- Weve telling them this could happen. They finally believe us.
- There was a BEDBUG infestation under a customers handlebar tape.
- Is the rear hook a safe jack point temporarily?
- I lifted this car on 3 arms by accident.
- I bet that made a noise
- hmmm
- When the smell of weed and cologne fills the whole shop.
- This very blunt bumper sticker
- D(e)tination is right.
- When you think youll be smart and fix the brakes after work.
- Nice Bulge
- It never leaks and dont worry about bumps I put a chain on it.
- What is this thing? Belongs to a company that does stuff underground.
- Saw this awesome tow rig in South Carolina today.
- Is there any hope for this? Brand new and just got a drywall screw in them.
