- Finally! I now know how to use my tools the proper way.
- Backyard
- So much for changing the battery
- I was neglecting a clicking noise when I turned, this is what happens.
- Hella Twisted
- DEF pump module on a JLG 12k telehandler with 21 hours
- Rolled into the shop a little off.
- Do I have to unbolt the entire header off to place the dipstick holder under the bolt, or or just the one?
- Should there be a Carry Limit for Throwables ?
- Distributor gear in my 02 Jeep. Lost my oil pressure and my timing went crazy while driving. i think i found the issue.
- Exercises
- We all know what this is....
- This bolt with a castle nut has a smaller bolt with a smaller castle nut/cotter pin holding it in place.
- Im getting a little vibration when Im driving.
- (2003 KTM 450exc) RFS short screen hex plug stripped to shit on this new 450EXC I just bought... how the hell do I get this thing out
- Alright who did this?
- New For 2020. The Bluetooth Motor Mount.
- coolant froze
- Just came in asking to test her battery and her power steering...
- Thanks for the help! Wanted to thank everyone for the help the new chain is on the ranger and is ready to start reassembly! Thank you!
- One of our service techs poked a couple holes into a top mount oil filter..... then proceeded to crank the engine over
- It would be great if someone sold boots with metal heel covers to save big feet having idiots like myself.
- Im guessing acid is leaking aka, time for a new battery? Or just cleaning it off might do the trick.
- Repair job on a hole saw at my shop. A for effort
- Any idea when my inspection went out / goes out
- Cars and Accessories
- Finally replaced the fans iny my dell r210. I can sleep again
- Sagmeister and walsh
- Think I found the source of the vibration.
- These are new re-manufactured calibers. Do they need to be painted to prevent corrosion or are they good to go? I don’t live in the rust belt but salt is out on the roads during winter
- Customer traded in this 46k 2013 WRX with no clutch. Had to trailer it to our shop.
- How do I get this nut off? Do I have to unbend the metal?
- Does this look infected to you?
- 82 Yamaha vision help
- I Love The Bits Of Environmental Storytelling!
- My steering doesnt work!
- Cust states tire leaking inspect and advise. I’m actually astonished it’s holding air.
- Anyone else get a little head today?
- 204,500 on this D16, still looking alright, but burning two quarts a week!
- This wind farm trucks transfer case decided thats far enough
- C/S Brakes started making noise
- I spy with my little eye... Some forgotten pliers..
- A tool my friend was given from a guy in the navy. Might be helicopter related?
- Rust on the rear diff. Totaled? 67 impala
- Log trailer just rolled in. Driver said he hauled over 100 tons on this just this morning...
- 2008 BMW 750Li. Came in wanting a tune up. Scanned the car. 39 modules total. 62 codes. Sold diag time. Check for CAN communication signal with a scope at the DLC. Erratic. Started with the left front kick panel and found this mess.
- I need to know the name of this part so I can find out how screwed I am.
- My girlfriends cars engine. A connecting rod broke off and poked a hole.
- Everyone liked the assembly photos so much I thought Id post some of the disassembly
- Catfish (MTV)
- CS - dont worry about the oil leaks
- A passthough? ON A LAMP?
- 6.6 lml injection pump failure. New fuel system. More pics to come
- Rotor screws are stuck. Any tips to unscrew them?
- C/S: just one bank 2 lifter change, please. Side note, I fucking love my new work table
- My motorcycle / scooter wont start, reason number 4 -- corroded starter relay -- a little wire brush and were good.
- Seems safe
- Heres what 50,000 miles of wear on sportbike rear brakes looks like. Might need to change at the 200,000 mile mark.
- TIL how quickly MAP gas will turn aluminum to liquid. The answer is very.
- Cooling tube replacement.
- Customer put his spare on backwards. Hope you wanted to replace your brake caliper.
- This came out of a Hyundai
- Way to go Temp guy...
- Rapid unscheduled disassembly
- 2015 Mazda 6 w/ 80k. Cylinder head cracked on timing case side allowing coolant to flow into oil.
- CS: engine died and is making a noise when starting
- LED Headlight. Can it start a fire?
- What is this? There are 3 fittings but I have no clue where they go. I dont even know what this is. Its 1980 CJ5 with a 304
- Two things need replacing: a run capacitor and my underwear.
- Running poorly, 4cly Dodge Neon w/pic ha
- Just rolled into the autocross paddock. That was an exciting experience
- Anyone lose their ChassisEars?
- I pulled the harmonic balancer off to change the front crank seal and someone has snapped the woodruff key off and just filled the gap with silicone!!
- I guess I should have checked the brushes last time the front end was apart...
- Broken knuckle on a 17000 ton coal train. Somehow it made it up a grade and ripped open starting from a stop on level ground.
- The way the sparks built up on the guard of my grinder.
- Can someone tell me what Im looking at
- Noticed this on the ladder after going up and down it several times carrying 60 lbs boxes.
- Eaton Fuller being rebuilt
- Shout out to that time when I failed to clutch for my team because this happened on Kafe.
- Had a pen, had a cart, did not have a charger.
- Second one this week... Both Jettas, both under 60k
- Anybody hungry? Were serving up crispy fried alternator all day.
- Guy just bought yesterday
- who needs an aftermarket stiffer spring..
- What is this plug
- BLADE - Marvel
- How to remove that top layer of ruber? from the brake caliper piston without damaging it?
- there was a larva in every port preventing a connection
- Boss, those arent rotors anymore. Theyre LPs
- Missing nut for front suspension 2004 Scion xB
- So steel stitches are a thing?
- Came in to work, boss told me to go identify a smell someone reported at our satellite location. *Sigh* twas a looong day. All the drums except one had flammables mixed with water from being improperly stored. Used motor oil, old gasoline, old diesel, unused brake cleaner. Blend of all on the floor
- Customer stated his son has just gotten his license and had the car for the weekend. Hyundai i30 1.6 petrol
- He has it Felix. Now its your turn.
- This is why you should use torque wrench (BMC SLR02 carbon seat post)
- C/S Check my brake noise.
- Sheet metal bender
- Guaranteed to fit rotors might be the wrong size...
- Flooded sump pit. Who wants to retrieve the failed pump for me?
- Not the usual rice you see here but still pretty shitty
- Imagine if that thing came flying back at you...
- Did you change the fuel filter?
- Customer says they just started it up and bang! Sideways rod, hole in the block, hole in the pan. Two valves in the pan and a greneded piston.
- Desert Eagle w/ 14 barrel at the range
- I thought the metal would help it stop quicker
- A real lock(ing) wheel nut!
- I uh.. well.. um...
- PsBattle: a man smoking an e-cigarette
- When the high pressure fuel line only needs 27nm but you set the torque wrench to 270nm. Custom cracks.
- C/S NOX sensors replaced at third party, CEL did not go away
- C/S: DS/R wheel locking up and grinding when braking.
- Almost didnt stop
- Sunday gun day. She aint pretty, shes mine.
- Ran some uv dye though my 1990 suburban that blows a charge in about a day. Does this look like I need a no compressor, or can I just pop off the hoses and change the lines?
- Singer confidence take up lever thread jam. Far too common of an issue
- (Chevy 350) Can anyone help me identify the plug with the two cut wires in this pic?
- In for a brake inspection. The customer actually said no and drove it home
- CTS-V got toasty
- Rebuilding my engine pt2 because I put my pistons in backwards. Has about 15 miles on it. What do I do about this. I can feel the scars with my fingernails on the pistons, but not on the cylinder wall. P.S. Scratches are on intake side,
- Live wires. Obviously been this way for some time.
- Well i think this one has seen better days.
- How are people doing this? (Low level in bad sport) those accounts were all brand new.
- Customer (another dealer) says long crank/ no start. I wonder why.
- GM quality for you
- Christmas present that I made for my mother
- Blursed_Ethernet
- Is this crank bolt reverse thread? 1995 honda civic, doing the timing belt and it doesnt seem to want to come off, just want to make sure before I give it a lot of uga duggas
- Fords new bolt delete package.
- Entrepreneur News
- trucks dont need oil!
- Steering wheel has 90 degrees of free play...
- Found the leak!
- Wasnt sure what to do with all that wood on Spectacle Island. Old-timey train trestle!
- 210k miles on this rod bearing
- Immolated coil! I really wish I could share the smell.
- Friday night range time. All to myself.
- Its like regular soon™, but with extra hover elements
- 600 miles on the build and a knocking noise develops. Guess I did something wrong.
- So im replacing my (Sway Bar Bushings) & the bottom bolts are riveted in & the top ones came out. But the new bushing came with four(4) new bolts. So my question is Should i leave the riveted bolts in the bottom or punch them out and replace them with the new ones. -Thanks
- Customer installed. Check for noise. You share the road with this.
- So, this hasnt had a cover on it for a while. Charger for our power jacks.
- Customer claimed the pads were under warranty.
- Theres that missing screwdriver!
- Gotta get them started early
- From the clutch job I posted earlier. Disk and flywheel
- Does the pintle cap matter? These injectors are the same, but the pintle is different. The cone shaped one is from the old set. These are going into a ln 06 G6 GT.
- Its what makes a Subaru, a Subaru.
- Access is awful in the Fiat Panda, could not get the cabin air filter out
- Ender 3 - filament run out
- I restored 8 hand planes that belonged to my great grandfather. I also made new totes and knobs for a lot of them
- C/S car doesnt feel right
- Sheared a starter bolt. Drove it here
- Trying to make bubble flare for Honda Civic wtf am I doing wrong? Also the tool I’m using was new and the threads are stripping because it’s going so hard.
- Pads are fine, I changed em myself
- This wooden auger (Archimedes screw I think) that I saw at an auction Saturday.
- French Polynesia
- To all of my southern state dwelling Wrench turners....I hate you all so much (details in comments)
- My crank pulley started showing signs of puberty. Its growing hair in places it hadnt before.
- I bet that made a noise
- Ive been working tirelessly on building my cbr fs2 into a full on race bike. Ive input countless hours and monies, had the head spark eroded after some snapped manifold bolts. Today, my heart crumbled once more...
- Just rolled in for an update!
- band saw
- Saw this awesome tow rig in South Carolina today.
- Does anybody know what these are for?
- Came in with the engine light on, turns out the egr was blocked!
- Anyone know what the little white box on the side of my fuse box is for? 2000 jeep wrangler 4.0
- How much wood could a wood chuck chuck
- Hey all, Scott here
- Just change the belt, I dont want any other inspections.
- C/s won’t start and it’s not the battery as that is new
- Ever seen a clutch get so hot it turned blue?
- How I picture fans of Rogan asking him questions on Instagram, Twitter and Reddit.
- Customer wasnt sure why the fill neck blew off the radiator
- Volvo Axle Bolts. Wild.
- Customer tried to do thier own brakes, DROVE IN like this.
- Is this normal hammer wear?
- It still ran AND drove
- Local Deputy cant recall ever hitting any kind of bump or feeling anything from underneath.
- Recently bought an 05 Legacy GT with this timing belt and have conflicting info. Did the OEM timing belt on these have blue writing? (Not fully blue like the Gates.) This one is pink. Does this look like it has been replaced? Cam gears have white marker on the timing marks.
- First time changing rotors. If I can do it anyone can.
- When it feels like your driving over a rumble strip and you cant see why...
- That you can clearly see this arc of plasma erupt from my welding torch
- After taking off, taking apart, and rebuilding the gear box, I was short one bolt.
- Even more carnage from previous tech and his cam replacement. Rocker shaft bolts not torqued and one never even tightened.
- C/S: I think the brakes on my trailer are getting hot.
- Thanks trash panda. I hope the wires were delicious and the insulation made good bedding/litter.
- Customer states her brakes squeek
- Dog Chewed off end of extension cord and plug to a saw. Definitely OSHA gore
- So.... How did my tie rod end crack lengthwise?
- Hope nobody needs to charge the riding jack. Right under the safety poster.
- Who the fuck thinks its a good idea to design it so you have to remove a control arm to do brakes?
- Took a tire off a car today at work and found this little guy smiling at me
- C/S grinding noise
- I think it may have been time to change these out, car is a 2011 with 43thousand kms. It was mint as shit other that tge conrrol are bushings.
- How do i clean this? Any ideas?
- Fishing Rods
- Afghan Still Life
- Wife went on vacation.... I bought some stuff for the new lab... it seems to be stuck in the livingroom.
- I need rotors now. (update)
- Sisters car lost brake pressure. I found out why.
- Customer states vehicle sounds like an old beater truck.
- Is my caliper seized?
- Riven machine broke
- What the hell..... Should I be happy?
- Had a flat tire the other day... Turned out that my rim was split in a straight line all the way around.
- The really sticky label was wrapped around the threads.
- JJ: “ I don’t bully Vik”. Instead he sexually harasses him.
- My mind is wandering to places even I cant comprehend...
- Prop shaft wanted some space to run around.
- Noticed the calipers are not centered after the shop replaced my chain and sprocket. Wrongly assembled?
- What causes rotor & pad streaks?
- used oil recycling truck blew a weld... yes he cleaned the toolbox before I could snap a pic.
- Bunch of High School kids think they can reuse this piston
- I see lots of bad rotors on here all the time. How about a damaged drum?
- I think this guy needs front brakes.
- Dance Fitness!
- Connecting rod from a ship. WD-40 for scale
- Must be some of those new performance brakes I hear about.
- This is where Id put my spring... if I could compress it enough!
- 6/6 spicy pillows
- Shout out to you FCA for the best lug nuts in the industry and the tire monkey who torqued these to spec....
- cursed_spawnroom
- What should I expect when replacing a brake booster and master cylinder? Also do I need to remove they cloth thing. 91 mustang
- Couldve at least used a bendy straw
- Just picked up this jpm-13 for cheap. The bed doesn’t stay level, I’m pretty sure I know what the problem is, just curious if anyone has one and would be able to snap a picture of this lead screw. I’ll be replacing them but the diagram doesn’t show a washer on this shaft. Thanks!
- While investigating an unrelated problem, I found a Sharpie melted into my radiator overflow tube. Wtf?
- Bomag compactor wont start
- Well well well, a ford engine in a boat.
- I need to drive to the next town right away. Just free it up.
- Always remember to fit the union before flaring the brake pipe kids. *Facepalm*
- we maintain about 120 postal vehicles. all the drivers favorite line idk it just fell off
- blursed_darts
- These will hold some weight
- Excellent start to my week. 12 hour ticket on a 3500 Silverado.
- Harvested my wheat today. Looking forward to delicious sour dough bread soon!
- $50k Jeep, 4 years old. There are supposed to be threads here.
- No table saw? No problem!
- I see your temporary electrical connection, and raise you this one!
- Whats wrong with this picture?
- Oil leak....Some lube tech out there owes me an apology.
- Just started making a noise yesterday!
- Something here isnt right
- What causes leopard print rotors?
- woops
- Did someone pull a prank on me? I pulled a marble out of my gas tank
- Hey, wheres the rest of it?
- The gods are in my favor this early in the morning
- Customer states front brakes are noisy.
- Just rolled into the gerotor
- Theyll be back...
- Sometimes these ABS sensor mounts can be a real dick...
- Scraping years of clippings off the inside of your mower.
- Sorry sad cases... Youre alive, so its time to happy the fuck back up.
- How many uggs would and ugg dugg dugg if an ugg dugg could ugg duggs.
- What grinding?
- This pump looks vaguely like Thomas the tank engine
- These computergenerated smart 3d printer supports are quite mesmerizing
- Are we doing guns, PCs, and cheap liquor now? Count me in
- 1995 Oldsmobile Cutlass ciera 3.1L v6. I got a few small concerns. Can someone identify this wire.(connects to a fuse to the right of the others) And what does this vacuum line hole (lower) go to?? The vacuum line container says purge on it
- For those who asked what can happen when the neck is not secured right. This is a smaller roll that completely broke you can see the inside of the neck on the right.
- Fuck tire slime
- Typical occurrence for anyone else? Lol. Going to line that section with cardboard and punch holes through it instead
- customer states coolant replacement this is the valve train. I removed the valve cover. Looks like melted chocolate! They fucked. Lol
- I bought this rear hub/spindle from a scrapyard and theres a rotor locked onto it. How do I get it off without hooking the brake cable up? [02 Grand Prix]
- More carnage from previous tech installing cam in Volvo D13. Exhaust bridge was ON TOP of valve stem, not over it.
- Do you have the answer?
- Customer had this towed in for crank no start. Acted surprised when I brought up the leaking caliper and bad brakes.
- Does it count if Im on a road call
- When you cant find a replacement, but you do have a bench grinder and cheapo welder.
- Gotta love my Crapsman vise
- When you think youll be smart and fix the brakes after work.
- So Im dumb and I started wailing on the axle before protecting it with the axle nut. The axle nut now wont reseat itself. Is it possible to rethread the axle, or am I pretty much hosed?
- Friendly reminder to make sure your loads are secure before hitting the road.
- Found the source of the noise I get whenever I turn left hard 😅. Thankfully screws are a way weaker metal than chains.
- Ive got a big fucking problem. I stripped and entire axle shaft, the threads are wrecked. Can I re-thread this? [02 Grand Prix]
- Pulling an after market alarm. All I did was take the tape off.
- How bad did I fuck up?
- Got tired of my Harios inconsistent grind, so I 3D printed a lower bearing for it
- The customer swore that she never heard any grinding or squealing when she was braking.
- I mean, I guess its new
- Someone is having a bad day lol...
- I have the right tools but my spark plugs don’t seem to be tightening. Should I use something else? Thanks everyone!
- my brakes make a noise
- Next on this episode of: I already checked my battery terminals, theyre fine
- What could cause this? 2013 civic si 78k
- Has anyone tried this?I cut and stripped the female end of an extension cord and hard wired it to the back of a 240v outlet. I plan on plugging the male end to my inverter.That way, i can run my socket of my inverter rather than shore power! Tested it and it work, but just want to make sure its safe
- Lets play spot the brake pad!
- Angle of attack
- It was only supposed to be a quick brake change. Both brake saddles turned out to be stuck from the generated heat and needed to be replaced.
- Had a case head separation over the weekend
- FISH
- Cat C15 cylinder head. About 4ft long, about 1ft wide, and about 1 ft thick. She is freaking heavy. Here for us to check for cracks, machine the fire deck, and rebuild!
- Sir, I dont think you wanna know what that noise was in your dash.
- First time rolling/smoking in 3 years. 4 days til its legal in my state! Cheers!
- Well it ain’t perfect. But we can proudly say we did it ourselves.
- Go home archer, youre drunk
- Someone actually wants to rebuild a cylinder head? Service industry comeback!
- Brass muffins I cast from flea market scrap, as muffins it will make Casting projects much easier, And my home made foundry made from an old keg.
- So a few weeks back I posted asking about the wiring harnesses I need for my fuel pump on my 2007 Ford Taurus. Someone found the right part I needed. But now I’ve hit another wall. I don’t know which wire is which. All the wires on the new harness are completely black and I’m not sure what to do.
