- decided to have fun)
- Sweeper Truck Body
⋆⸜ 𝘪𝘤𝘰𝘯𝘴 ✮
- hmmm
Nobara Kugisaki
- Vintage Microphone
😰😰
- The spring clamp on this Walmart reading light which cracked under the pressure of its own spring.
Kissy!!!
- A combination Flashlight, USB, Compass, and Keyring, otherwise known as a FUCKstick.
Harley Quinn icon
- Went to a Tesla show room a few months ago and got to hold one of the battery cells used in the Model S.
- My new tap handle for hop bombs
- Always wondered why NFC didnt work on my soundbar.. they never wired it in
- In Germany (Europe in general) plugs are often very hard to get out, so this one has a hole where you can put your finger through to plull it out easier
mob pyscho
- Meet my good friend! [8]
Bridget ♡ GGST
☆ Blitzy Doodlez ☆ (@BlitzyBlitzwing) on X
- I was wondering why my gamecube wasnt communicating with my tv
Boyfriends Edit!!33😇
- What is this steel pliers/crimp/punch type thing?
Bam Margera Pics
- Successfully installed an AC outlet today.
Pride Fox Creator
- Got a 12 GA shotgun shell and 12 gs that need smoking. Any creative ideas?
2/3
- $90 worth of Nintendo Switch accessories for $5
ok this time add pfps
- After a few weeks MIA, this little guy is back safe in my pocket.
- From design to print, only took me 3 episodes of furutama. One hitter-bong adapter.
- Could somebody help me identify this tool, and for what use it is. Ill try my best to restore it.
- If only i had a pair of scissors
- 320,000 km on these. I think I was a bit overdue on changing my plugs.
- Reddit is back. Thats grate!
- This un-machined screw I got in my package of anchors
- This golden record/rocket pizza cutter
- Ouchie.
- How best to fully plug this bolt hole. I plan to stain and poly the piece. Suggestions?
- Got bored in a teleconference and ended up making a giant paperclip from some wire.
- Yep...and the other prong is now stuck in the socket
- Not a car but yall might now know this. What is the best grease for this dry pulley bearing? I have lots of stuff laying around but can apply only once and it squeaks and is quite resistive under low loads.
- What is this giant soldering iron used for?
- Just like when your step dad tried to ground you, youre not actually grounded
- One of the screws that came with a Christmas present was unthreaded.
- Magic malleable drill bits: made of Chineseium
- Client collects mini outboards from 1940s model boats. Super detailed.
- Broken strut on a Tacoma.
- I am told this is for removing lids from metal 5 gallon buckets
- What is this switch like thing?
- Bet youve never seen a piston rod like this...
- Giant soldering iron I saw at a garage sale.
- Way to go Temp guy...
- The subject was found buried in Alabama- is it an unexploded ordnance?
- Wizard hat cone.
- Bought this battery last night... apparently its from the future
- I was neglecting a clicking noise when I turned, this is what happens.
- My tools get so upset when I clean them.
- Bought a new car, this was in the trunk: I guess this means no kidnapping my dates anymore.
- My clamps are so old they were made in west Germany.
- My friend has had trouble sleeping, so I gave her a G and made this lil guy from an unfinished hardwood tool handle I found at a salvage shop. Does the trick and fits into a 14mm water pipe too
- A piece on our 3d printer was about to break, so we just printed the repair part we needed.
- art
- The size of this screw
- I have power!
- The last tool youll never need
- My Style
- What a strong sprinter will do to an alloy freehub body
- Safety first
- Got those crutches labeled, boss
- What do you guys think of my new Roach Clip design?
- Blursed whistle
- This kindling axe
- Citrus Juicer + Googly Eyes = Bird Head
- The 38 on this tape measure
- looks safe...
- I introduce the NT2020V1 Designed for going out and not touching store door handles and also using the stylus at the checkout aisle when paying with your cc or debit cards.
- Kitchen Queen
- The tip of my cheap screwdriver bit completely broke off inside of my screw right when I got it in.
- When the walk-ins condenser freezes youve gotta do things the old fashioned way.
For sale vintage Heuer Autavia with endlinks HLF Gay freres from 1971 in very good condition. DM for details #instagram #instadaily #sale #forsale #sell #selling #gf #bracelet #heuer #autavia #instagramers #instalike #likeforlikes #instafashion #instaart #instafit #watch #watches #hodinkee # - @rare_watches on Instagram
- Shift knob I made from the bent valve that trashed my engine. Fun fact- this was a new valve that lasted 3 weeks before separating below the bottom keeper groove
- Bug Out Gear
- 4 gauge shotgun barrel next to a 12
- The smoke pattern of this burnt out brake light
- Splash Pad
- Gotta run a 480 V extension cord across an area prone to pooling water? Try this ironic solution!
- This phone cord happened to fall in an ampersand.
- Sometimes you dont have every tool with you
- I got my ModMic today, and decided to DIY a mic stand, with an old lamp!
- Next thing I know, /u/tirednightshifter is going to be telling me this nut is upside down!
- teTa
- Extra parts:(turret)deals 99 damage but falls apart due to the missing screw
- My father dropped a screw while working on an 8-foot platform. This is how it landed.
- some stuff I found in the washing machine after washing my work clothes over the last year or so
- BubbasRockinManCave on Etsy
- Bomber gear. Thanks Santa :)
- When the parts roll in from the factory looking brand new ❤️
- Added eyes to my bottle opener
- Blade of the pork (give stats)
- Working on a compressor in the basement of one of our buildings, thought Id have to roll back to the shop to get these out. Turns out the bit extender by itself fit around them perfectly. The Leatherman/bitkit/extender combo is ridiculously useful.
- Wife texts me Well, shit.
- Acrylic display box
- Feels like I need to go and reforge the shards of Narsil
- Blursed animal
- 2 casting sessions in!
- NGD(New Gear Day) Gerber Shard
- Tempotec Sonata HD Pro Review
- Help identify this please! It says Atari on the plug end but I cant find anything on it! Thank you!
- Free phone charging stand with organizer. Built in speaker box, fits any phone
- My paper cutter looks like a derpy mole
- This circuit board thing was on the wall when I moved in. The guy hooking up my internet service said the wire goes down through the crawlspace and leads to the outside steps at the back door. He doesnt know what it was used for.
- Thanks ford
- After about 2 years at this house this key is bent like this.
- Did I do ok? I think I did ok.
- Found in the gutter (who knows how many cars ran over it). Still works perfectly.
- Man tears razor apart in blind rage in response to ad telling him that some men are overly aggressive. More at 8.
- For those about to knock, we salute you!
- My Mrs bought me another Leatherman Micra as an early Christmas present. Im over the moon but at the same time not impressed with the blade overlap. Is there an easy fix?
- A can i have that?
- Always double check your co-workers. Pulled it out like this
- Cool Stuff
- In a gas station bathroom next to the sink...
- Can I get 1/2000 of my money back?
- Found on another sub, did when you need extra oomph to get the car going.
- hmmm
- Screwdriver/reamer ? Picked up for 2 bucks, guy didnt know what it was either. Patent no 7446/11 .
- Removed on of my caddys earlier - Found this inside - Microsofts clippy must have escaped my office Install?
- Screw it, Me, Graphite/Charcoal, 2020
- My vacuum includes a tool to remove hair from the brush
- small boi
- Our bottle opener is a leftover railway spike from the Canadian National Railway.
- This is my coworkers voltmeter.
- Remington 870 barrel fell off the receiver when I was at the range. Pictured is the end of the mag tube. Wondering if this might be the cause and how Id go about repairing it?
- Vintage GE germicidal lite fixture. Dated as 4/52.
- dremel 300
- Specialized ribbon. Hot Rod Magazine tip, 30 years ago.
- 3d printed F clamp
- My typewriter doesn’t have a 1 key, so the lowercase eye is used as i and 1.
- Reusable grocery list
- Carpentry - Hand Tools
- When the machine shop RTVs brass drain plugs in your newly built big block which has to be winterized because its installed in a boat. * https://i.imgur.com/jbUeTml.jpg * https://i.imgur.com/8b5NJ6X.jpg
- Throwing knife +10 damage
- Whats up with this 22LR?
- highly inhumane weapons of mass destruction
- Tin Bronze Khopesh an Egyptian sickle sword, I’m really happy with the result I casted this myself from scrap copper and a pewter vase.
- Been up for hours focused on trying to make a working portable vaporizer using only what I have in my room and this is what I got. Works surprising well. Will definitely work to make it better by the end of the week.
- Traditional bowhunting
- Improvised RPi Camera Mount
- hmmm
- The MichaelTek LastAMP - Its the last amp youll ever use!
- My dad thinks hes hilarious
- Found with old sewing materials. Any idea what it is?
- What kind of nail is this? Trying to get a few to match during a restoration of a dresser made in Boston in 1939.
- My wire clip failed quality control
- Old school Canadian Police Robot. Basically a pump shotgun on tracks
- I was just gifted a switchblade mustache comb.
- Does anyone know what this weird contraption might go too?
- This thing made paint spaghetti after being dragged across the floor.
- Wife found my stereo remote with her knee while crawling across the bed
- Cuts poorly and bogs down in thicker grass
- god why
- These pliers were made in a country that doesnt exist anymore.
- Chargers now available in our library!
- Could we all please take one moment to publicly shame Ford lug nuts
- I found this strange item, it has a 3/4 hookup for a hose and is made of rubber, plastic, and metal
- I love getting as thin a slice as possible when I clean off the ends of a steel tube
- X-post from r/wtf...The breaker at my sisters house was tripping, so her boyfriend used tape to force it to remain on. This is how I found it after she complained it was making funny crackling noises.
- Blursed Peppa Pig
- This giant crescent wrench
- Firearms Guide
- Can anyone tell me about this kind of lock? How do I unlock/pick it?
- Previous shop set the gap on ladys plugs
- Just replaced this bastard that was living behind the dash of a Lexus ES300. Not too bad actually
- Owner stated I did it like that so the brake line didnt rub the tire.
- Whoever at GM is responsible for this crap design deserves a punch in the dick. Two damn weeks waiting for a new bolt...
- Snap-On, snap-off....
- More tools should have this warning
- Hoping someone might recognize this mystery part.
- Ammo Reloading
- That was quite a bit of work!
- This power cord has been made in Western Germany
- Not how I wanted to start Friday night prep.
- got a screw that was missing threads
- As I threw my dart the flight came out and it stuck in the board backwards
- Will this work for pumping out old power steering fluid?
- My coworkers electrical tape melted
- Stanley plane
- How this blade came off
- At fist I thought this was a tire gauge, but it is definitely not air tight. Anyone have any idea what this is used to measure?
- Foo Fighters Ray Gun - The National Museum of Toys and Miniatures - Kansas City, MO
- Whats the point of this?
- For Christmas I can finally check the oil in my 2500HD again. My old dipstick rusted out so I plugged it.
- This screw missed the threading machine
- Not a single one broke
- Wine bottle lanterns
- Ak 47u
- Standard headphone jack but on the other end looks like a tiny butt plug
- This bike lock has three words lined up at the same time.
- Day to day, this my most useful multitool.
- Delta robot
- 147,000 miles on the original plugs. Not bad, Ford. Not bad.
- So to everyone who saw my post about the Canik ftf, the guy found the issue. Firing pin sheared off and it was NIB.
- Pepper Spray Gun
- This plug which doesnt go all the way in
- LAMPS
- its the only air tool I have. #justlubetechthings
- So my girlfriend didnt want to lose the keys to her lock...
- hmmm
- New guy at work had some trouble with plugs, and everything else he touched...
- Enjoying my new Glock 19.5, but I don’t know how I feel about the magwell
- In November 2018, my mom broke her ankle and had to get screws & a plate. Today, she got all the hardware out and the surgeon let her keep it all.
- Belt buckle
- I left it behind...
- 1977 Star Wars Trading Cards
- Now Im complete
- Saw this in the X-Ray room while having some photos taken. Articulating plastic shaft connected to a magnetic base and a 1 steel ball. Used as a marker, or landmark? In X-rays? Where can I get one?
- [Self] My home made lightsaber for my Jedi cosplay.
- A spark plug cut in half [573x323]
- Credit Card Multi Tool EDC
- Angle and lighting make this bolt look like its floating
- Hobby
- This windproof rope lighter I was gifted that comes in handy every so often while outdoors
- My earphone jack is slightly bent
- This old 1942 20MM MKII shell casing found off the coast of the North Sea.
- Clarinet Mouthpieces
- My clock key I use to wind my Grandfather clock is only polished on the side I have to really push on.
- Come on!
- Blursed_mega wrench
- Found on the sidewalk. Metal - maybe brass?
- 68 and 73 Gillette Adjustable TTO Safety Razors, paid $4.50 each.
- Chastity - First time Key Holder - tell me what I need to know. Any advice greatly appreciated
- Blursed_apology
- hmmm
- Cats love them!
- Blursed Nerf or Nothing
- Did you know theres no hidden screws under the label of a Surface Arc mouse? My colleague didnt! (Good news is it was already broken)
- I found a walnut a bit tougher than usual
- seagull outboard motor
- The plug from these House of Marley headphones feature the Rastafarian Colours.
- Made a stainless downstem today, wanted to show it off.
- Painted some 3D printed SAWs this weekend, pretty happy with how they came out
- BNC to RCA. Nailed it!
- Currently rebuilding my carbs and just noticed one is missing this pin is include the overflow part. How critical is it? Ive got no clue where its at. 73 Suzuki GT250 Hustler for reference.
- Computer Center
- The way I coiled the wire around the mic
- Anyone ever seen this come out of a surplus spam can?
- These are so painful to step on.
- I couldnt find my drill so I got out my grandpas cordless drill.
- This multitools corkscrew presses into the palm when you use it.
- The way our hammer blends in with the bedsheets
- Friend asking on FB: these little components with torque markings
- A switch oddity of unknown provenance
- What arrived VS what was ordered. Deal was advertised and purchased on Facebook so assumed legit.
- For the comic lovers, I 3D printed Kirak Infil’a’s lightsaber
- hmmm
- The way it coils
- wear your eyepro
- My friends grandpa glued his garage thermostat so you couldnt adjust it.
- Has anyone ever used this type of set up? It was a hand me down that I received 15 years ago but never used because it scares the crap out of me to even try.
- Stretching out the spring in your pen to make it bounce higher.
- Deer camp
- This 96 core fibre cable carries the communications for our offshore windfarm from the onshore substation to the offshore platforms. It has 960Gb/s of total bandwidth.
- My car key broke apart and saw theres a chip inside that you need to turn the car on.
- This key is shaped like two city skylines
- Found by my mad gran and she wants to know what it is from and is refusing to throw it away.
- Any idea what kind of tool this is? I think it may be for woodworking, found inside a wall of 120 year old house
- FIREARM FAILS !
- Spark plug with no threads
- Went to use my Loctite super glue today, nozzle disintegrated for some reason and came off. Only ever stored in my desk...
- Anyone know what kind of 9mm this is?
- Please help!! I was DIYing a clutch replacement on a 2012 Honda Rebel 250cc and when I was finishing up I found this nut on the floor. I have no idea what it goes to any info is appreciated. ( DONT UPVOTE)
- Metal thing with foam rubber base
- Bang & Olufsen
- These screws that came with my brother’s new pc case came welded together.
- My little cousin just fucking threw this at me.. Yes those are rusty pins and a magnet.
- You guys ever use one of these mutants?
- Plastic tool with a slit and metal tip
- There is one screw without a thread
- The screws that hold my dentures in. That is a grain of rice!
- Fun and Bored at Thanksgiving...
- had to borrow my boss keys today
- Please help me identify sewing machine parts. On the left, accessories for my 1980 White sewing machine. On the right, Singer parts from rummage sale. Thank you!!
- I hand machined a LEGO Lightsaber handle (gallery in comments)
- A pistol barrel cut in half that had multiple bullets stopped inside
- The end of my attempt at a metric century today
- What a £70 glowplug looks like
- SPRiT left | Chinese right
- One of these screws missed an important step in production
- After 1 year, half of my phone case is yellowed, other half is still like new. It’s one solid piece.
- My garage key has four keys on it.
- This screw didnt come with threads.
- Just finished this. Gotem
- This Snap-On toolbox key looks like a wrench
- I dont know, its just not running right (old vs new)
- One screw in a pack came with no thread
- Found a bunch of these rounds, 219 zipper. Anyone have the rifle it goes in?
- Wife got a deshedding tool for the cat. Its ribbed for her pleasure.
- Wonder what caused this case to Seppuku
- If anyone was wondering, a Zebralight H53 clip fits perfectly on a Maratac peanut lighter.
- Roof paint
- Modified a screwdriver bit to take care of those unremovable screws
- 6 Volt Vehicle Lighting
- Bolt out on a morning stretch
- Give your recommendations on the best detachable keyring device that youve found!
- 1999 F150. Replacing some light bulb and cannot figure out what this grey connector is hanging for. Anyone know?
- Getting ready for modding switches like
- old spark plug keychain. recycle old parts.
- Found some 5.56 simunition rounds at work this morning
- This box of screws contained a completely flat screw
- Hifi stand
- Can anyone give me info about the inscription and where it was acquired?
- The internet has ruined me
