An Shiraishi . ೨ৎ
- I keep getting a fuzzy edge on one side of my sliding dovetails. Am I doing something wrong?
Warden Non Binary Pfp
- Carbon Fiber and Aluminum honeycomb core, cut in half for your pleasure. [4600x3450] [OC]
gyaru Eula hcss333
ewwwwwww ur nasty
- A tower of origami squares I made by folding someecards from when I worked an office job
- Making the Minecraft bee out of wood
Rody icon // Deadplate
- Christmas ornament
★☆★
- Tool Tip: Dont have a flat tooth blade for splines (or even a small enough chisel to clean up the grooves)? Find a small flathead screwdriver and make it a small chisel!
Unlabeled + Non-binary Pfp
- Double, double helix.
Rose
- Blursed pencil
He doesn’t seem to mind
I go overboard and then get sad I’m giving more than I get😀
- Does anyone know how to fix this? Details in comments
ena moment
FRAGARIA MEMORIES HALLRITT
- Just tried to knit cables for the first time. Is this issue because my tension is too tight? Sorry for sideways photo
Y2k Mcbling Alhaitham Icon
meme
- First time adapting a pattern I wrote myself!
- Does anyone else hesitate to paint their sketches in case they get ruined? Anyway heres Joker
From Awkward to Amusing: The Best AI-Generated Facebook Images of 2024
my small redesign
- Blursed_dart
Mojo jojo aesthetic pfp
- 2nd time doing miter keys and i get these holes form the kerf. how do i avoid this?
cameron
smth is wrong with me
- These toothpicks.
average hiyori/ibara interaction
- Hi my 91 Honda CRX is making a whining noise and a bit of rattling noises I checked the transmission fluid and found this on the dipstick anyone know what the best next steps would be or if this is it for my transmission?
Rose
- I just managed to finish my entire eraser
𝑰𝒂𝒏 𝒅𝒖𝒇𝒇
- How do I fix a thin yarn defect while casting on?
agender + genderfluid pfp
Kayo Majiba
- I am struggling with the mouth. Doesnt seem to match face
🔪🦴🍼yuri!
- hmmm
osuka
୨୧
- Beginner here- any advice? My knitting keeps bunching up/twisting and i can’t get a clean look
Lute
dedf1sh
- Finished the scroll
Mesmerizer soft cutecore icon
- Seeing everybody here do them sparked my interest in trying one. Not the best, but I was proud of my first dovetail. Did it was just a saw, hammer and chisel.
SMG4 n SMG3
profile picture
- Yes, I did to my job perfectly today
٭ - Rui - ٭
- I thought my floats looked pretty cool
- Preventing laddering on DPNs? I give my first stitch on a new needle a pretty good tug like Ive read to do but Im still getting pretty noticeable laddering
- i little drawing ive been trying really hard
- Its messed up.
- You guys seem to like the pipes I build so here is another. Yellow and Purpleheart one hitter.
- Made some creepy art inspired by Gojira. Traditional, A3
- Flutes
- A toothpick broken in half fits perfectly inside an arm joint, making it easy to customize and paint.
- Am I screwed? I was hurrying and put it on the wrong side of the line. It’s in a visible spot. Any way to fix it, or just start over?
- Made myself a croquet mallet as a test before making a set for a friend. Weights in at 3.1lbs, pau ferro head aluminum striker plates, hickory handle
- [FO] Shale Baby Blanket
- The Irish passport has a tricolour flag binding
- Hand wood carving
- Day 7 , 5yo wanted to play in the shop/garage
- How bad is it, doc? Can I fix this?
- Need Some advice on hair.
- Meet Angela, Omalii, Digital, 2019
- Oak Mallet, handle made with chisel
- Oh it feels so good
- Why?
- Yo, Angelo...
- Worst hash i’ve ever smoked, you can put an oz in a joint and won’t even feel a buzz, got it from a friend who got it very cheap, idk what to do with the rest, im 99.99999% sure it was cut, not sure with what tho. And also this was insinde
- Old 2x4 vs New
- Here’s a shot of the castle joint used on a bed project. I chamfered all the parts where they meet with a block plane.
- Does anyone know where I can find the same doe foot applicator for my broken lip gloss?
- So these are a lot harder than I thought. First attempt at dove tails. (Yup that’s blood)
- Teaching myself how to use a lathe! Left will be a peace pipe style with an inline carb, middle will be a stem for another pipe, and the right is a little tamper I made for myself.
- I bought 200 bd ft+/_ rough sawn, weathered, barn boards (Midwest USA) for $300. The ones on the top of the pile were #2 white pine but they are all between 12” and 15” wide. Started sorting through this week for a project and discovered over half of it is clear Doug fir. Pretty happy.
- hmmm
- What stitch is this?
- Made a big food board for a restaurant... Birdseye maple and a smidge of dye to make it 👀. 49 x 9 1/2
- My friends dont participate in woodworking so they wouldnt understand my pride in my accomplishment. Looks like yall are my friends tonight
- The laptop magnet is strong enough to hold up this pen
- Jury rigged mission style finish. Pleased with the results!
- De tudo um pouco
- None, me, pencil, 2020
- Best way to avoid blow out?
- My first attempt at a mallet. Oak with maple wedges
- My upper and lower lashes touch and stick together, is there anything I can do besides trimming them?
- Help with dropped stitch (live stitch not seen?) anyone know how to fix this? I’ve looked on YouTube but that didn’t help
- This piece of pasta out of the box that wasnt exactly cut.
- My new bullet journal
- i am creating a bunker.jpeg game on roblox! I am working ahrd on it and hopefully it will be done in a week or 2
- Closeup of my first lace project, blocked and ready to be gifted. So happy with how it turned out!
- I planned on staining this today but I guess not
- Found in dorm bathroom
- And my wife says Im not stylish enough for a bow tie
- Yeah, everything is 13/16.
- First shot at a three way miter. Custom distressed white oak coffee table. This beast is 60×60.
- Combined two of my creative pastimes, woodworking and sewing, by making a coat and the buttons to fasten it. Pleased to have found a good way to use up small maple scraps. Made using hand tools.
- Spokeshave technique question
- Cleaning out my basement and came across my first attempt at a half lap dovetail from about 3 years ago
- Can anyone tell me how to frog from the cast on edge?
- How to give this a twist?
- Drawing of a woman with 1 eye covered by the hair and the other close
- A reminder to mark your waste sections with an x. These were supposed to be pins. Now they are firewood. Oh well!
- Benchy extrusion issues. How can I clear this up a bit?
- I’m going to call him Bob.
- How to prevent dye from epoxy filling cracks soaking into surrounding open pores?
- Purchased basic pine at thebig blue store- sorted carefully through for straighish pieces. Jostled into the back of the car, hauled into the basement, and these two managed to stick together all the way from the forest
- Knit picks interchangeable... Cables breaking
- Worn through nickel plating on needle. How do I fix this?
- Reposting my art of my trainer because it died in new (literally 2 people saw it)
- It’s picture frame day again, Fixin to cut the rebates.
- Can anyone help me identify this stitch? I thought maybe seed stitch.
- Cut my first mitered dovetail. I’m going back to stopped grooves from now on.
- blursed pencil
- Mariya Takeuchi drawing I did :)
- I dont care that its cheap and soft, white pine is fun to work
- My favorite lil’ coil
- First attempt on mitered dovetails. Very rewarding
- Unraveling to switch to smaller needles but just thought I’d share my first real attempt at cables before I do, thanks to those who previously gave me advice : )
- First attempt at dovetails. Not great, but a good start. Can’t wait to keep trying!
- How would you patch this.
- If you’ve ever wondered this is what 270 stitches looks like
- My favorite part of a project
- For those who asked these are the stages in my first steeking swatch.
- How to prevent these gaps when knitting in the round?
- Joinery for a lattice frame. Got a new table saw and figured I’d try a new method of joining a corner. Lots of room to grow.
- Is this kind of tearout while handcutting dovetails normal? (Paul Sellers method mostly, using poplar)
- Finally trying DPN
- Just finished running through my routing jig. Thank you to everyone here that has been giving advice so far. Shop shoes included ;)
- Edwin Hayes, Me, Mixed Media, 2020
- I drew a portrait from an instagram selfie of shycatgirl (I dont know her real name, lol)
- Peanut llama with a peanut helmet
- hmmm
- First dovetail: Cosmans layout technique, Katz-Mosess jig, and my own two hands.
- Time to send this through and flush cut it off!
- Needed more practice drawing hair and hands. So I drew some hands with hair.
- Knot position wrt dado looks like a Canadian from South Park
- Dont Look Back, Watercolor
- I also goofed up my cutting board pattern. So much wasted Purple Heart :(
- 18ish rows into this shawl and the pattern is starting to take shape!! This is my first big project - only 261 more rows to go 😅
- I have a thing called heterochromia iridium, it makes my eyes different colours.
- [Skin Concerns] I have literally tried everything for these CCs/FA/idek anymore and NOTHING seems to cure it. Any suggestions? Fungal acne? Ccs? Im about to go see my doc because this is really starting to affect my confidence...
- Amgles
- Shou Sugi Ban with a heat gun
- Big lead
- Ending 2019 with a yarn chicken loss :/
- How my dad installed the click-together laminate flooring. It’s like this through the whole room. He plans to do the whole upper floor...
- What’s that saying? Measure once cut..... damn it!! I fall victim to cutting one extra inch off so often. And I know it stems from measuring malpractice... but cutting this drawer bottom short really hurt the feels after so much work put in. Lol
- My cat clawed away all the soft grain on this dowel
- Testing out this beautiful yarn bowl made by my father and finally getting some work in on my big project
- 2B hair victory. Please ignore straighty at the bottom.
- 💀
- A few days after shampooing, my 4 y/o’s hair starts to form these ringlets. Like I took a curling iron too her hair.
- I won at yarn chicken last night, with my first no-pattern lacy scarf. The yarn was also a leftover from a previous project, so happy to see it all gone!
- Epoxy and tint available at big box stores to fill this small knot?
- Anyone know what these spots come from? And why they won’t go away lol (Maple)
- Second project ever! A MUCH better scarf compared to my first one.
- I wont get rid of these little blobs.. Details in comments..
- Know anyone who would like a natural walnut ring?
- I love winning long tail cast on yarn chicken
- Instead of stripping the screw it stripped itself
- Uneven chop stick breaks.
- Got to the milestone of being able to eyeball a foot
- Started cooking up some dovetails in cherry for thanksgiving yesterday.
- Im thinking about building a vacation spot inside my cowlicks, a nice place to hide away. Apparently this is my hairs effort to curl at the root.
- played thread and bobbin chicken today, Im gonna have to call this a loss
- I am finally conquering my strange fear of knitting needles and my lack of coordination!
- Second attempt at working on stitches, I messed up the cast off on the first one. Any recommendations for a product for a beginner to work on?
- (Sorry, reposting with a better picture) What is this stitch? I’ve had this for years and it’s looking really worn out. I’d like to try and recreate it, but don’t know how to do the multi-row stitch part...
- Tried my first Dovetail. What a bugger up. Suppose “practice makes perfect”
- I made my first thing. It is made of wood.
- Help! Knitting in round for the first time, is it supposed to be uneven??
- First time on magic loop ... do I knit the stitch/yarn that connects the two sides or just leave it long? Thanks!!
- Three tortilla chips cooked in to themselves in my bag
- Does maple often have this type of erratic grain? I find it beautiful yet I dont have much left of it. Wondering how common it is.
- When you decide to take one more pass around with your router on a finished project .
- This dying orchid branch that decided not to sacrifice it’s other half in vain.
- Im wigglin
- Zebrawood miter keys are my new favourite.
- A couple of gentle giants
- Its important to consider where the page folds are when printing
- Babys First Dovetail. Maybe I should have actually read that guide.
- Removing dent with h2o. I dropped my air hose nosal and dinged the edge. 10 mins under a wet rag and then sand with 120 makes for a good fix.
- Ive been trying to figure out the rib stitch on DNP for like 2 weeks. I either keep making ladders or some loose stitches like the one pictured. Is there a way to fix that without starting over? I think its starting to stress the yarn.
- This little mini pallet that came with my refrigerator delivery.
- No need to throw away these broken sandals
- So THIS is what Baltic birch is supposed to be...
- Its super lame, but with some popsicle sticks and super glue, Ive made babys first boar spear
- Can anyone identify this pattern? It’s part of a kimono I bought and I want to try and knit one myself! It could also be a crochet pattern.... I’m not really sure
- Twisted Vase - Mahogany and Maple
- A friend needed a holder for her reusable straws so...
- First dovetails, pretty proud of myself if I may say so myself!
- My chopsticks still had some of the outer bamboo on them
- My sock almost matches the carpet
- The dot in my eye, was born with it, is a mole.
- What kind of spider is this?
- Resin joined
- Bananimousity, Me, Pencil, 2020
- Beauty is everywhere in woodworking. Even when you make corrections :)
- Need help identifying wood.
- Just saw this influencer on twitter, and I’m an ass so I had to post it here... I really have nothing to add to this. She removed her nose almost entirely and enhanced her eye makeup. I’d be terrified if I saw this in person.
- Just an eye study. 21/100
- No thanks, Ill have the carpal tunnel instead.
- I just sharpened this pencil on 3 grams of shrooms with a pair of scissors. I cant tell you how badly Im laughing right now!!
- Been working on my hand stitching, self drafted design crocheted bag with cotton lining
- Is it weird that I have curl envy for this envelope adhesive strip cover?
- I love blocking a shawl and finding a hole in the middle!!!!! 🙃🙃🙃
- Anyone else not hating quarantine?
- Blanket border advice for sloppy edges?
- Uncut Spaghetti Strand I Found While Cooking
- What are my options for recapturing these two stray twines of my yarn?
- Jigs; They dont need to be fancy, they just have to work.
- I think I zigged when I should’ve zagged.
- My left driver was rattling between 90hz and below so I tried to figure out why. Turns out this mofo small piece of hair was point straight at the driver while being stuck on the foam.
- Forbidden pasta
- Gaps when knitting in the round? (See comment for details)
- The lead in this pencil is off center
- So close, and yet...
- This is what I get for knitting during a zoom meeting.
- Construction completed on my deck this weekend but some idiot forgot a hideaway screw in the middle of it. Im that idiot
- Color change showing reading progress.
- Ambiguous illustrations led to a mistake. Can this be fixed\covered?
- Second attemp at handcut dovetails.
- First one in the books. Can only get better from here, right?
- Alternating yarn causing large stitches.
- 👁👄👁
- Proof of concept: Medieval City Wall Network
- Random tight curls throughout my wavy hair make me giggle for some reason
- Using low quality wood for chopsticks, what could go wrong?
- Was going to make a sandwich.. then this happens when I tried to get some peanut butter...
- Anyone able to give me an ID on this stitch from my sweater?
- Help please! Hole in seed stitch cowl
- Am I the only one that finds this cool?
- Colour change of pine from sunlight
- I played a dangerous game of yarn chicken...
- Chopsticks that dont break evenly
- Micro Drawing I created of Zombie Calvin. Check out my “Micro Drawings” YouTube page to see my Micro Drawing process. Qtip for reference.
- I-Cord Cast-On has this gaping row; is this normal?
- First ever project (YouTubed how to knit on Sunday), I’m trying to make my son an Easter bunny, making a simple square but somehow I messed up and have no idea what I did or how to fix it?! Any help would be so appreciated!
- When you get the tiniest knot in your lace
- How do I get a 1x1 rib spaced out like this?
- What happens when you don’t move a desk for 16 years
- Is there a worse feeling.
- girl and a rabbit. any tips or criticisms?
- Made a cherry, pecan, and hard maple end grain cutting board
- Heres that end cap I was practising for. Had to be pretty close to perfect as the joint remain unglued to make the piece removable. Im pretty happy.
- How the smaller erasers angle is the exact same as the larger one and how they fit together
- Just wanted to make the pencil adorably small but got more than expected with the results and decided to share
- This, when Im just trying to patch a hole in a sock
- Trying to chisel out a bunch of material left after sawing most of it away. Halfway through the swing and I thought, “hm this is probably going to not be good.”
- Dovetail Practice - chewy looking end grain, I just sharpened my chisel too. Is my chisel not sharp enough? Or is this because it’s pine wood and soft? Hoping my edges are at least clean since this stuff gets covered over by the other board. But curious.
- The pattern of this plank
- [PSA] If a spot/mark doesn’t go away, get it checked out! I was diagnosed with basal cell carcinoma (BCC) for a mark on my forehead that didn’t go away
- 😅 Won today’s game of cast-on chicken! Whew!
- that damn pencil tip.
- Made from walnut scrap, first time I’ve got the bowl how I wanted it.
- This section curled at the root, but not at the end. The exact opposite of my curl pattern.
- Its funny how less than a 1/16 can ruin your entire day
- [Help] Ive used this pair of 4mm bamboo needles for one square of knitting and realised that one of them is bent. Is there any way I can straighten it or should I leave it be?
- First try at freehand box joints. It aint much, but its a start!
- Well $!&@. What did I do wrong?
- Wood/Resin cribbage board and pegs! Turned out well for using colored resin for the first time.
- Perfect faded line in the timber where the sun doesn’t reach
- [Fanart] A small Lisa Lisa i did yesterday
- I managed to take 119 IKEA pencils in one trip. What have you achieved today?
- Wenge bow tie in live edge walnut
- Pic of my kitten’s baby tooth. I found it stuck in his brother’s fur after a robust kitten tussle. Q-tip for sizing.
- My first epoxy cutting board came out nice, cherry wood and blue epoxy. Sanded to 3,000 grit.
- Knitting a baby blanket for a friend out of Bernat Baby Blanket Stripes yarn-the picture doesn’t do the adorable “Ballerina” colors justice!
- Drawing of a woman (sorry my camera is teribble)
- First try with this “impossible” joint
- The amount of mechanical pencil lead that goes to waste compared to a full stick
- Love these sweatpants, but they’re too loose at the bottom and it bothers me. Is there any way I could “tighten” them? Beginner here, so forgive my ignorance I couldn’t find anything online (also ignore my chipped nail polish lol)
- I just dropped my CPU on the floor..
- Just wanted to share this cute little curl I had today :)
- I Originally Posted this in r/MildlyInfuriating, but someone said it could go here as well. My lead Broke in the middle as I was drawing.
- Drawing of a woman
- Well.. I knew a table saw couldnt do the same job as a jointer.. but I bought one and tried anyway.. and proved myself right.
- When this happens to chopsticks
- I started from the hair, because I’m not good at measuring the face. What do you think about my style? Any tips?
- My pencil sharpener. I love it! Need better lighting in my workshop though. I put the pencil on the bench for the picture - you can see the shadow.
- I’m hand sewing some nice and easy polycotton fabric and the thread keeps bunching up like this. Why does this happen?
- I just finished knitting a hat and I noticed this. Any way to make it more sightly?
- Anyone else have this happen with their NYX Epic Ink Liner?
- A precision cnc machined tape dispenser.
- Line drawing of Vera Paige (my girlfriend)
- I found this completed, unblocked shawl while cleaning out my yarn stash! Wow!
- This is my beginning of Sméagol, does anyone have advice for how to draw the facial features with shadows on relatively tight skin? I’m struggling a lot with the cheeks and stuff😅
- My yellow onion was a purple onion on the inside
- Drawing of anime girl
- Before and after sharpening my forstner bit
- [Rant] Almost a year in and... I may go bald ripping out my hair.
- Found a twin almond
- First time in a long time putting on foundation(only half of my face) and trying some bright eye-shadow. Anyone have tips on making this look more neat?
- Roblox Mansion tycoon. You were soooo close!
- Soo. How do i continue shading?
- The way the stack is straight but the depth of field makes it look uneven again [OC]
- I tried to draw Khaleesi and this is what happened. Im new to drawing portraits. Any advice?
- Got bored, so I did my nails
- Halfblind mitered dovetails for a little box Im working on.
- Looking eastward along the River Thames from London Bridge. The start of a ‘river’ project. The river has been routed out by hand.
- In the process of restoring some vintage tables and Im not sure what stain this is, can anyone help me?
- Hi guys, looking for some advice on how I might be able to flatten this cutting board out a bit before I start sanding (no planer)? TYIA
- sketches I drew, I don’t usually draw but I thought they are cool!
- Just finished my newest pipe (complete with wooden bowl)
- This very thin match
- 1st step complete on pinewood derby car 😀
- Sad day =,(
- Blursed pencil
- New needles! Karbonz US 00000 1mm
- What is the sign of a good woodworker?
- This. Everyday.
- I hate when this happens...
- My toothpick had part of a knot in it.
- Any way to fix this? Or best way to hide it in my knitting?
- Is there any way to fix this? It seems to be a semi-dropped stitch.
- You can have your Lee Valley, I’ll take Pooh and hot glue any day of the week (wood surfboard build)
- This pencil is all wood (the rest have graphite in them but this one doesnt)
- Good Morning (afternoon) Columbus!
- The wood, photograph, 4000x3000
- My first attempt at proportionately correct portrait. Started to learn drawing only recently and would love to hear some tips and tricks that I most likely dont know
- This almost perfect Swiss roll.
- It turned out to be a self portrait! Glad I had the motivation! Annoyed that I did it on lined paper though. What do y’all think?
