- Woodworking Software
- I wanted to make a cutting board without generating any scrap wood in the process. This is what I came up with with the help of some resin. I think the scrap boards are even more striking than the main one and this made the most of the original glue up. Excited to share
- Saw stand
- Home decorations
- Woodworking Business
- In progress Mizu palm rest Im making as a gift
- DIY
- Home
- carvings for a swing...
- Dresser I made.
- Timber cabin
- Saw stand
- Vendor Cart
- Bamboo Kitchen/Bath Mats
- Wish i had a 24 hour hardware store.
- Sprinter Conversions
- Bedrooms
- Stairs were carpeted; underneath painted yellow and had 2 different stains. Tried to restore some glory back.
- Made a set of saddle top stools to match a table I made for someone. I would do a lot differently if I made them again. But they are very happy how it all came out.
- So who needs a gym? Just hand planed and squared these beams for a workbench build. My arms feel like rubber .
- Table en bois diy
- AGING WOOD
- Barn wood quilts
- Around the House
- First box joint take 2....thanks for the great advice /r/woodworking.
- Full feather gunstock blank
- Basement decor & stairs
- Mattress Uk
- Step stool for my daughters preschool
- Lap joints for a custom home desk, turned out OK
- beds
- The woodshop I work in! I can’t believe I’m so lucky.
- Barnwood beds
- Boys Bedroom Ideas Tween
- Diy soundbar
- i made a tool tote for some profile planes. kwila and Tasmanian oak.
- My wife has a knack for the cozy. This is our bedroom.
- Inlay
- 4th
- I know river tables are over done, but I was pretty freaking proud how this one turned out.
- Headboard Parallelism?
- Flattening some cedar slabs today
Walnut bar with radius corner in fabrication at the shop. The 1 reveals are white acrylic and backlit with LED tape lights. Excited to see this completed! #coastalcabinets #qualitycraftsmanship #superiorservice #exceptionalexperience #customcabinetry #ilm #wilmingtonnc #wrightsvillebeach #figureeightisland #baldheadisland - @coastalcabinets on Instagram
- Quandary Peak Wooden Topo
- Haven’t posted on here in a while but here’s my latest project finished. The Nicholson workbench, made from mostly construction grade pine.
- Built some cedar gardening containors
- Craft room ideas
- First dovetail... horrible
- 16 hours milling from slabs wears you OUT!!! Maple countertop for my kitchen.
- Built a staircase!
- Hand cut, 1 hour per drawer.
- Bedroom
- Carving difficulties
- It wont blow your socks off, but I havent but a mortice and tenon joint since high school twenty years ago, so Im pretty please with the way this turned out
- First wall cabinet (almost) complete. Birch ply with maple facing. Shelves will hold baskets so no doors this time.
- Build in bunk beds
- I took some walnut, cherry and an old Samsung tablet and created something to hang on my wall.
- jPallet Planter Box
- We’ve come full circle. Restaurant I’m at built decorations from non-pallet wood to look like pallets.
- Woodworking Ideas
- Building resin tables
- Bamboo Flooring ❀
- Second attempt on scrap wood. Almost there.
- Diy platform bed plans
- Bedrooms
- DIY Projects
- Wormy chestnut
Another batch of chopping boards off to their new homes today. - @rhinowoodworks2019 on Instagram
- Flexible & Joint
- Dresser
- bedroom ideas
- Workshop ideas
- Woodworking - Jointer
- Basement upgrade
- Started working on a matching tool set this past week. All in all there will be the level, mallet, smoothing plane and marking knife.
- Building and projects
- My in-progress headboard. First decently sized project!
- Router bit box with leftover Walnut and Walnut plywood. Quarantine build #1
- ... more shop sharing
- Handmade wooden mosaic
- Music desk
- White oak floor with a double border of Ipe, finished with an oil sealer and two coats of bona traffic
- No more lattice please. Basswood. Long sections are 50 x 9. 5 down, 5 to go.
- Any fishermen? Building a wall mounted rod holder set for my brother. Walnut and lightly spalted birds eye maple. Just waiting for a final sand before assembly and finish.
- Desk I made myself awhile back. Probably my first real big project. All oak and a chalkboard for the back to right notes.
- Nice little addition to my workbench, perfect for glue ups and finishing.
- Special spot in my heart for a good glue-up
- What is that tool on the left side of the screenshot?
- drill holder
Last step, Arm-R-Seal finish this weekend. Walnut wood is from our front yard, making it twice the family heirloom. 2-years in the making. - @bachmobile5 on Instagram
- Dream Garage
- I made a combination jig - Thin ripping on one side and a featherboard on the other!
- Woodworking Hacks
- Epoxy
- My new Drill Press Table! No limit to what it can do :) (video link in the comments)
- Wood Crafts
- Farmhouse shutters
- Build Furniture
- Finally organized a few of my most-used tools, using scraps and curse words.
- Dream bedroom
- Do you think I can just use liquid nail to secure the Weaber weathered hardwood boards to the strand board? Or do I need to use nails as well? How do I make the nails not obtrusive in the design? Currently the boards are just laying on the frame. Its a headboard for my bed
- Chambre à dodo
- Thanks for the advice from everyone who offered it. Finally finished after 6 weekends. Cabin loft bed for my toddler. Still have some finishing touches to add.
- Table saw cart
- tool box diy
- What Janka hardness range do you like to keep your end grain cutting boards within? Walnut (1010) - Maple (1450)? I rarely see them with much harder or softer woods.
- Digital Fabrication
- Tool room
- Cutting Boards
- 3 Player Cribbage Boards
- Why does my jointer do this??
- axe
- Experimenting w/ making earrings
- Not the most original design but heres an argyle cutting board I finished yesterday
- Cutting Boards
- Dovetail Practice - chewy looking end grain, I just sharpened my chisel too. Is my chisel not sharp enough? Or is this because it’s pine wood and soft? Hoping my edges are at least clean since this stuff gets covered over by the other board. But curious.
- joinery
- Triple bunk, loft and double bed for my Lake rental. All lumber yard wood. Carbon gray stain and water based polyurethane. Lots of tedious sanding, staining and poly application. But it turned out great.
- Coffee table
- Outdoor Wood Bar
Contemporary stair cladding using Australian Natives engineered Rustic Blackbutt 👌🏼 #staircasedesign #australiannatives #timberflooring #designinspiration #timberflooring - @taitflooring on Instagram
- My bedroom creation!
- Wood: Cutting boards
- Router Sled
- CNC Router
- More dovetails please
- Metal Fab
- Upgraded my marking tools and really happy about it
- Bed ideas
- No more cup rings on my parents tables. Coasters made of scrap pieces from 2016 projects.
- Room Divider Ideas
- Woodworking jewellery box
- Black appliance kitchens
- Working on a shelf my girlfriend wanted for her rock collection. She seen it on pinterest and I had a pallet in my storage that I tore apart and repurposed.
- Dressing Room Design
- Custom joinery: the Bob joint
- Some curved treds, careful to match the grain
- Woodworking Tools
- Boys comforter sets
- I built this convertible saw station/modular workbench. The miter saw rotates beneath the top surface to make room for the table saw out-feed and/or additional work space. (Gallery in comments).
- Hated not being able to properly sharpen my chisels/plane blades, so I made a John Heisz styled sharpening jig. Jesus. I’m paring end grain on hard maple with ease now. I love this thing.
- Frame around tv
- CRAFT ROOM/ OFFICE IDEAS
- Saw horse
- 1 PLYWOOD FLOORING
- DIY Home Décor
- Parquet sample floor turned into dining room table
- Finally built a fence for the router table.
- Can someone please explain to me the proper way to find this angle I keep messing it up
- Cabin dollhouse
- first dovetails in a few months. square and stable. white oak. a bit of an illusion with that shadow line.
- I built a planer sled today. Anyone have tips on using them?
- Cutting board
- Before they come boxes
- For those asking how curved rail/ stringers are made, this is one way. How I used to do it.
- Chest of drawers for my woodworking tools
- Building cornhole boards
- No one at Habitat understood why I was so excited - Nordisk Andels-Eksport 3 Piece Set! Queen bed, 8 drawer dresser and mirror for $250
- Puzzle board with epoxy accent. Took a bit of patience!
- I gave new life to my $10 thrift store mirror by building it a frame
- Wood Species
- I hear you like end grain cutting boards? Here are my first attempts...
- Archery
- Basement
- Not terribly exciting... When three government agencies tell a veteran that they cant build a ramp on his wonky steps, somebodys got to step up.
- Obligatory first hand-cut dovetails
- 99 wide maple buffet... More work than I thought itd be!
- Made a custom finger joint router jig over the weekend
- ART . . . Carved From Wood
- Desk I made my girlfriend for Christmas
- Reclaimed wood nightstand
- A 15/14 hammered dulcimer I made back in trade school as a side project. Been kicking around some design ideas, and I hope to start making more soon!
- Sharing a sneak pic of my Kamani and Chechen Victorian style entry way table top Ive been slowly been working on. This is the underside. Just wanted to share what kamani looks like since I dont think many people get to play with it. I got it on my vacation in hawaii this december.
- Carpentry tools
- 3D Printed Dovetail Marking Guide
- Piano Projects
- Letter box, 100% hand tools only http://imgur.com/gallery/NAa0Jxc
- Coffee table I made, a few years back, that you can put plants inside 🌵
- Mobile Workbench
- Bosch pts 10
- Picture of the inside of my bow case.
- The grain in this piece of wood looks strangely familiar....
- Made a mirror frame from some sweet Spalted Hormigo
- How to clamp for glue up?!? Final piece should be 10 feet long
- The Farmhouse!
- (Update) Cedar is all cut!
- Woodworking Courses
- Why did my polyurethane glue joint fall apart?
- First herringbone glue up for cutting board infill. Not perfect but learned lots!
- Bee keeping
- Bowls
- Never enough dovetails! I miss my shop so bad...
- Made a lumber cart for my short boards
- Mortising machine
- Outdoor vinyl flooring
- Evoke Showrooms
- Staining Wood
- Just finished cleaning and reorganising. Are we still doing the show your shop thing?
- home ideas
- Had to cut several 1/16 inch strips of wood. This method proved to work really well and easy. Very consistent cuts.
- Had the lid engraved as a final touch to this gift to my new niece
- Box of box joints
- WOOD WORKER
- Rainbow Inlaid Dovetails is this weeks Joint of the Week (instructional video in comments)
- Woodworking Tools
- Does maple often have this type of erratic grain? I find it beautiful yet I dont have much left of it. Wondering how common it is.
- boat
- Garage bar top finished. Cypress.
- Wood Flooring Inlays
- Budget flooring ideas
- Wood bench plans
- My new Multifunctional Workbench with integrated table saw. A real beast :)) (youtube video link in the comments)
- Building plans
- Good way to start 2019, freshly cleaned shop
- Dewalt table saw designs
- Hurdy Gurdy
- Shes almost ready for work. Wasnt expecting that much figure in the maple!
- Oak handrail
- I have a hammer! I can put things together! I can knock things apart! I can alter my environment at will and make an incredible din all the while! Bed is complete!
- I interlaced two of those annoying frilly paper edges
- First drawers = under workbench storage
- After two days of re-shaping the plane iron and the chip breaker, finally having success shaving off pieces of Yosegi-Zaiku from pattern block.
- I made a thing to hold my saw ... and some other things
- Last year I had to hide some holes on custom made oak doors. This is the result.
- Whats the point of buying an expensive table saw when you can be a little inventive?
- Paddleboard
- King sized headboard with figured cherry.
- We don’t deserve dovetails they’re just too pretty. Can’t wait to see how my mid century desk turns out
- ITAP of a table after it rained
- Creative Beds
- Wood scraps
- Paulk workbench
- This is for sale near me. Oak, $80. I dont need it for flooring but seems like a good price for the wood... thoughts?
- Put my scrap pile to good use today.
- Solid and Cheap 2×4 Workbench
- Started building a small, freestanding, woodie for my apartment. Plan to set some (very) short problems with moves I find difficult
- Guest room / Office
- Coasters I made out of my dads old teak water ski.
- Floating headboard
- Probably the most stressful glue up I’ve had in a while. Used strap clamps and some pin nails to hole the angles together.
- First attempt at bridle joint come out pretty well, learned from mistakes.
- Kids double bed
- [Fine Woodworking] Whats the best way to glue this hairline fracture?
- Inspiration - Garage
- Garage & Storage Systems
- Fellow craftsman help me out. The link in the comments has 6 options for laying out this panel that will be shaped and top a taekwondo belt rack. What’s your favorite of the options?
- quiver
- Im really liking this plywood and 2x4 bench dog system I put on my assembly table at work.
- Workbench drawers
- If this isnt the biggest glue laminated table top Ive ever made, its got to be close. 16 level for scale.
- Crafts
- Wooden workshops
- A little forest of joints.
- The 4 stages of making American White oak handles for my kitchen.
- Garage workbench build
- Helfer
- Wife wanted a blanket chest... wife got a blanket chest.
- Adjustable saw horse from Shop notes
- Grass Lake
- Banca Katia
- how else would I pull a 25 1 radius?
- wooden garden furniture
- CNC World
- Arrows
- Joinery
- Made a wooden and marble table
- Just a fun shop shot. Enjoy staying at home and working on your projects!
- Mortising machine
- Quick Japanese tool boxes on a Saturday morning.
- bedroom
- Is it normal to get these lines when using router sled to flatten ?
- When you leave the door open long enough for a visitor to sneak in 🙄
- Walnut and cherry box complete, just in time for Christmas
- Probably covered under measure twice, cut once.
- gotta get this scaffold up a few inches higher. better just use this uneven pile of wood cutoffs...
- Awakening of Spring
- Forbidden caramel.
- Vertical Chess Board Using No Hardware
- When your wife wants a live edge dining room table but the only place to store the wood is where the table will go...
- Router table fence
- Todays haul. Time for some new projects!
- woodworking lessons
- Poured my first river table ever last night. Went better than expected. Little over-pour so Im in for some heavy sanding, but Im super excited
- My current garage workshop, re-design for added productivity starts tomorrow!
- Large set of 2 bunk beds finished and built! The whole unit (including the 6 subdrawers) comes apart and fit in the back of a pickup.
- Boys comforter sets
Check out more of these beautiful geometric marquetry art boards by @the_little_evil_corporation made with the help of Roarockit Technology!⠀ ⠀ Check out @the_little_evil_corporation to see more awesome projects!⠀ ⠀ .⠀ #roarockit #repost #tbtfeature #thursdayfeature #tbt #diy #diywoodworking #diyskateboard #skateboardart #customskateboard #woodworking #make #create #inspiration #mapleveneer #handmade #skateart #roarockitfeature #customdeck #designbuild #handmadeskateboard #vacuumlamination #vacuumpress #lilrockit #custompennyboard #minicruiser #woodart #marquetry #geometric #woodveneering - @roarockit on Instagram
- modern gazebo
- I made a little entry table for my wife to go in our new house.
- Jigs
- I just pimped my router table
- I love my wife and I need a garage.
- Ready for my first craft fair this Friday!
- Wood Magazine March 2017 Indoor/Outdoor Bench.
- && WORK BENCHES 8/5/15
- Made my first workbench! Is also the first thing Ive done that took any real planning. Supper happy with it and now I have place to actually build more stuff.
- Got a bunch of hard wood from a closing cabinet shop. Saturday project was building Jay Bates lumber racks.
- Final project for my 3rd semester of Heritage Carpentry and Joinery : A small scale set of housed stringer stairs.
- Built a nice decorated tool dresser for a workshop. I think this time would be great.
- MATCHFIT Dovetail Clamps
