- Ypperlig ikea
The night before the battle is always the calmest. Tomorrow we Domino and glue!!! Take no prisoners, only splinters!! #festool #woodworking #splinters #glueup #clamp #virginia #custom #diningtabledesign #diningtable #wood #maple #festooldomino - @liberty_craftsman on Instagram
- Tower stand
- downstairs bath
- For the Home
- Custom Musical Instruments
- Additions to My Space Heater Collection
- Bike Design
- 2nd and third attempts at dovetails. Not great but getting better.
- signal processing
- These cables
- 3D Printing
- Craigslist finally had something awesome for me!
From the archive — 2019 Unused posters for @surplus.collective // Typeface by @flavienminson. - @jonathanlevain on Instagram
- My over engineered solution for wifi - My Wife
- As I got a lot of interest in my first home made volume post last weekend here are the 3 more I made this weekend!
- In case anyone was wondering what the copper True Precision barrel looks like on a P365
- Decware Mini Torii Stereo Integrated Amp
This rifle is coming together nicely. @jec_arms_llc killed it on the cerakote. Now all I need is my Ruckus from @defiancemachine I’m so excited to get this thing to the range. #rifle #precisionrifle #longrun #longrange #longrangeshooting #gun #guns #300prc #proofresearch #nightforceoptics #spuhrmounts #masterpiecearms #triggertech #accuratemag #area419 #atlasbipod - @lumberjosh2a on Instagram
- Violin makers
- DIY woodwork jig
- DIY- BUILDING
- Lower receiver
- Network Rack Tidy Up
- Snagged a second R240: details in comment (reposting with one more pic)
- Finished my rooftop woody today. Very happy with the result. Need to make more holds now.
- Putting tape over the slot on cassette tapes so you could record your own stuff onto it
- panel saw kits
- Guitar-riff-ic!
- I keep getting a fuzzy edge on one side of my sliding dovetails. Am I doing something wrong?
- It only took me THREE years, but I FINALLY made a handle for my vice.
- PEC Tools - 12 Cast Iron Combination Square. Details in comment.
- Patiently awaiting at PCB 😭
- Lack Rack Success (Disregard the Poor Cable management)
- Finally made the jump
- Site Inspiration
- Same design?
- Most recent guitar build. Flame maple, walnut and Osage orange
- Got some tinker toys in the mail today!
- Refinishing
- Upgraded office/listening setup
Proprio il 30 settembre del 2007 i Foo Fighters sono arrivati al numero 1 nella classifica degli album del Regno Unito con Echoes Silence Patience & Grace, il sesto album in studio della band e il secondo numero 1 nel Regno Unito. Lalbum è stato nominato per cinque Grammy Awards, vincendo il miglior album rock, ed è stato anche premiato Brit Award del miglior album internazionale. 🤟🤟🤟🤟🤟🤟🤘🤘🤘🤘 Siete fan della leggendaria rock band?! Allora fate un salto sul canale 66 Rock! . . . #unitedmusic #ithappenstoday #rock #metal #rockmusic #foofighters #foofightersband @foofighters #legend #music #instamusic #musically #musicislife #rockstar - @unitedmusicsoundattraction on Instagram
- Amber LED Flashing Light Bar
- Amplifiers
- Wife is out of town. I dont have a project to work on so figured Id practice some joinery. First attempt at a through tenon. I know I need to cut a shoulder and what not but I think first attempt came out pretty solid.
- Parquet chevrons
- Beds n Room.
- Members NYE - Pop Art
- Getto “o rings” on a razer huntsman TE. it was too loud so I open it up to see what I can do to make it quieter. I folded some duck tape the cut them in to string like shape. And sowed them in the optical switches like so. Thought it would be fun to post it here! Works like a charm
- Mp-9 | Ex Machina
Happy Weekend! #REPOSTing some 👁Candy from @avrvisionrobotics @avrvisionrobotics The BF-X 800 is the robotic system you need to automate surface finishing processes on parts between 500 and 800 mm! #BFX800 #BFXsystems #consistent #hightech #precise #aerospace #automation #robotics #jetengine #innovation #fanblades #industry40 #aeroengine #fanucrobotics Le BF-X 800 est le système robotisé dont vous avez besoin pour automatiser les procédés de finition de surface sur des pièces entre 500 et 800 mm! #systemesBFX #constant #hautetechnologie #precision #aerospatial #automatisation #robotique #robot #industrie40 - @fanucamerica on Instagram
- California Casual Decor
- Air compressor
- Bought both for 5 bucks. Sharpened and adjusted, they work great.
- Upgraded my marking tools and really happy about it
- Festool Domino
- Heavy metal guitar
- Picked up some AS blanks for my Lets Split
- Guitar stuff
- Vinyl hardwood flooring
Office sanitization killing germs, bacteria and viruses is what we do best!!!! Making sure your staff, customers are safe #OntarioMade #madeintoronto #covid19 #disinfect #dentist #dental #officesanitization #torontopubliclibrary @ontario_made @ontariomade.ca #madeincanadaproject - @termilight on Instagram
- Made a black wallnut desk with pine legs
- Finally bought a nice rack
- Brazilian Cherry
- cessna 172
- Does anyone know of some sort of small vent I could buy and install here?(more in comments)
#hlstairs #balusters #stairs #treads #newelpost #newelbox #box #construction #design #remodeling #handrail #art #pattern #arch #architecture #building #insta #instapic #picoftheday #picture #instagram #instadaily #instagood #instadecor #decor #interior #interiordesign #illinois #lith #lakeinthehills - @hlstairs on Instagram
- My WoodRiver craigslist score!
- My new Glock!
- First try at freehand box joints. It aint much, but its a start!
Brand new Cheyenne tools for professional artists!!! Availible in www.blatikbodyart.com #cheyenne #baltikbodyart #tattoomachine #tattoo #tattoos #tattooartist #tattoorealism #tattoosupplies #inked #klaipeda #tattooshop - @baltikbodyartklaipeda on Instagram
- Chemical Free Cleaning
- cigar box nation
- Braided loop longer than solo loop (both size 9)
- After way too much time, I finished the first joint for my table! First time trying any sort of dovetail.
* 🌹🌹🌹🌹🌹🌹🌹 新生キラクローゼットは 原宿駅から徒歩3分ほどのところにある マンションの一室♡ 🌹🌹🌹🌹🌹🌹🌹 * #新生キラクローゼット #完全予約制プライベートショップ #住所非公開 #色々非公開 #来てのお楽しみ🥰🥰 * #kiraclosetvintage #kiracloset #vintageshop - @kiraclosetvintage on Instagram
- There’s no pattern on this wall decor
- Thank goodness theyre tied off!
- Since Everyone Else is Posting Theirs - My Home Lab
#holdencommodore #fordfalcon #ssute #v8 #holdenspecialvehicles #xr6 #xr8 #6speed #ls1 #barra #barratheworld #ls1 #lsswap - @s1sequential on Instagram
- Floors in. Dont mind those rough edges.
- Staircase post of our newly built house. Wont budge.
- Cables, Cables, Cables
- Hardwood stairs
- This corner .
Apresentamos a tecnologia F2. Nova madeira, novo corte e novo concave funcional. Mais resistência, durabilidade e performance para enfrentar o pior chão do mundo. Disponível via DM e Whatsapp (💥chama no corre💥) #skate #skateboard #skateboarding #skateboarddeck - @lojacostume on Instagram
- rifles
- HowTo Videos
- Restoring an old Pair of Knight 25 monoblocks
- First 4 attempts at completely hand-cut dovetails for my woodworking class :D learned from mistakes quick
- Kool Things
- Didnt have a HBA with internal connectors laying around for my custom NAS, but did have a 8088 to 8087 bracket. Its only temporary, of course.
- Dewalt storage
- Is it possible to spot repair hardwood floor? I had a portable AC unit leak water and it went unnoticed, now my floor is warped. I’m confident I can sand it smooth, but is there any decent way to match the stain/clear coat? I’d like to avoid redoing the entire floor.
- My NADs.
- I might have gone a bit overboard with these...
- guitar
- Banjar DIY
- ARCHITECTURE - Lobby
- Time has come to power off the homelab
- That moment you realize some of your hard maple has figure in it! Bought it for $3 a b/f
- SSK + SUNN 0))) + Boris = 3
- There has to be safer ways to install this gate.
- Hung my hand tool cabinet on the wall today.
- 3D Lightsaver
- New 3D printed phone stand. (See comments for info)
- Found an Alesis Microverb 3, Behringer Autocom AND case all for $49.99 at Goodwill today!
- Ive never been more proud of something I built on my own. (Time Lapse/Album in comments)
- The end result of those dovetails cut at the table saw.
What muscle group needs your foam roller the most right now? 📸 @kaorimoto - @rumbleroller on Instagram
- Vintage Skateboards
- B&T Duo
- Nothing like a bunch of preorders to start the day.
- Thicc
- Current setup. Always changing, always growing, as they say in elementary school.
- saying goodbye to sanding round overs by hand!
- Not much at all, but it is the start of my wood working journey!
- For those asking how curved rail/ stringers are made, this is one way. How I used to do it.
- What would cause the marks on the left side on a jointer?
Hallo Leute habe Gestern nach langer Genesung mich in meiner kleinen Werkstatt begeben und habe gleich einmal begonnen ein kleines Projekt von meiner to do Liste abzuarbeiten. Ich finde ist ganz gut geworden was meint Ihr ? 🙈 LG und noch ein schönen Sonntag 💫👍 (unbezahlte Werbung /Werbung durch Markenerkennung) #werkstatt #holzwerkstatt #hobbywerkstatt #hobby @ent.tools @triton_tools_de @sautershop - @bastel_kobold on Instagram
These two cheeky pipes back in the shoppe! Link in bio. #3dprinting #3dprintedinstruments - @wojciech_rusin on Instagram
- This little guy showed up today, works quite well!
- Beck MCS (Mongolian Chop Squad)
- Need help with disassembling a glued joint
- Everythings coming together
- Psychology Experiments
- New Home, New Amp
- Acoustic Electric Guitars
- Didnt learn anything, but I slapped this together yesterday.
- Sure there are a few things I would change but I finally reached a point where I am able to truly enjoy music on my stereo. In the past I found myself listening to the speakers rather than the music itself.
- Ahsoka Theme Lightsaber Etch & Customisation
- I clearly need a lot more clamps
- Finally made myself a rack after figuring out to buy a real one is so expensive. This one is under $50 and 2 hours to make.
- First guitar build is getting closer to looking like something real... first internal routing project. Not as terrifying as I was thinking... just need to assemble... and then figure out how to build the neck (whats pictured is a rough cut placeholder)
- Brick & exposed beams
- Bridge City Tool Works Mini Block Plane 1st Impression
- Living
- Added the SMSL M400 and upgraded lamp. Art Blakey and the New Jazz Men arrived today. First listen went very well!
- My old 2ch gear as part of a 5.1 HT Lineup
- Atuador linear
Contemporary stair cladding using Australian Natives engineered Rustic Blackbutt 👌🏼 #staircasedesign #australiannatives #timberflooring #designinspiration #timberflooring - @taitflooring on Instagram
Any guesses as to what this is? 🧐 - @cody.dear on Instagram
- decks
- Pre Owned Guitars
- Home Favourites
- Before it becomes a piece of furniture its a bunch of crazy looking boards
- Epoxy/Concrete Flooring
- I made a chisel from an old file
- Is acetone safe to use for removing bubbles on a resin epoxy chopping board ? I’m in the process right now and used it but will it be safe because I will sand and oil/wax?
- Good thing the AC is functioning
Nosso Model Old School Classic Logo na cor grafite. Design exclusivo dos anos 90 com a tecnologia atual da Crail Trucks. 💎💎 - @crailtrucks on Instagram
- Sure was easy to sand this drawer box with no bottom in it!! :-(
- More dovetails please
- Moving day and first pair of speakers! Ill get to unpacking and cable management at some point, but first...
- I made a basic 5u stand for my networking gear
- My apartment homelab front view
- Am I losing audio quality by keeping my sub under my desk like this?
- Experimental Cartridge/Bullet—6.7x55mm NSC-HV
- Cajon
- Is this kind of tearout while handcutting dovetails normal? (Paul Sellers method mostly, using poplar)
- A couple of weeks ago someone posted how they do curved rails where they work. So here’s how we do curved stringers!
- The wait is over!
- Basement Renovation
- Just built my first volume for my home climbing wall. This changes everything!
- My collection is complete:)
- My (somewhat) vintage audio system :)
Saturday morning reprieve. #mandolin #luthier #octavemandolin - @thiswoodguy on Instagram
- Made an led message board with my friend out of mahogany, LED strip, and a raspberry pi
natural color/white oak select better/install end finish 👌🏼 - @silvermassgeneral on Instagram
- Send Help! I Need a Black USB C Microcontroller.
- Pulled from a smashed PC
- Is it normal to get these lines when using router sled to flatten ?
Furutech receptacle faceplate auditioning #furutech #hifi #highendaudio #stereo #music #highend - @furutech on Instagram
- DIY Wood Floors
- I 3D printed „Odradek“ from Death Stranding as a desk light
- Ladder work for the win
- Going Shooting.
- Th boxes have moved since yesterday.
- Who else has an endless supply of these?
- First bit of work this beauty has done in a while.
- Pre 2k Autococker paintball gun [ 2987 × 1427]
- Covid19 Vaccine, Digital, me, 2020
- Probably covered under measure twice, cut once.
- Needed a router table, decided to build one to fit in my workmate instead of buying one. Saves space and money.
- My new core. I needed more fiber in my diet... :-)
- Consolidation and Efficiency
- CNC Machine
- My $75 yard sale find. This thing is unstoppable.
- Heart vs wallet. Heart won.
- $150 craigslist score.
- Dewalt tool box
- [Cubicle EDC Detail] Two 1 inch diameter steel ball bearings make for a effective budget fidget toy
- The difference in color after 12 years of a bed shading the floor from sunlight
- Saw this on a job site yesterday
- DJ Table in the making
- Apartment living but still want to join the lawn technique conversation at work
En los años 70, ¿quién hubiera pensado que nuestro Temporizador Digital JT-215A se convertiría en una pieza de coleccionista muy codiciada en el siglo XXI? Con este asombroso y preciso reloj de bolsillo, aún hoy en día se puede encender el sistema de alta fidelidad de forma controlada por el tiempo. #vintagefriday #Pioneer #vintage - @pioneerhomespain on Instagram
- Moog Prodigy
- Knocked out a quick adjustable lumber rack this afternoon
- Help identifying wood?
- Modern Concealed Hinges and European Mortise Box
Splice repair to Pivot Sash @cangort_park_house_restoration #mortiseandtenon #bespokejoinery #sashwindow #historicbuildings #windowrestoration #listedbuilding - @historicwindow on Instagram
- @spb_repairs on Instagram
- CNC
- Fuzzy first layer. Help?
- Well thats not what was supposed to happen. After hand-cutting 2 grooves for the box top and bottom along with 3 stopped dadoes for the box partitions this board cracked suddenly in 2 parallel places down the center. Hoping my gluing holds 🤞
- Any suggestions on what to put behind the couch?
- OK as a follow-up to my last post about the Audio Technica cart - the arm is not squint ;-) It really was just the wonky camera angle.
- I started hard-piping dust collection in my shop
- Router & Switch
- Synthesizers
- I likem short and thick.
- Plumbing porn
- I bought this Yamaha RX-450 receiver, tape deck and CD player all for $15 at Good Will. I dont know much about audio equipment. Did I get a good deal?
- We just finished up a video tour of our studio space! Full video in the comments.
- Growing!
- My first raffle win and artisan!
- Bookbinding
- Kids stuff
This thing is freaking awesome. Men..... y’all problem don’t here this much, but y’all are some talented, smart, amazing being #irollmyown #itrimittoo - @pinkshears on Instagram
- Just attached the top to the bottom on my first table! On to finishing now. It is just big-box pine and poor workmanship but I like to think the engineering is alright and I am enjoying learning as I go!
- I made my friends custom (Laser themed) Coiled USB Cables for Christmas. Thought Id share. (more pics in comments)
- I made Mr. Bat (Concept art)
- You should have to pass an iq test before you buy a domino. Yes thats all the way through and yes thats the reminder I wrote for next time.
- portable desk
- Working on a musical MIDI leg using a Le Strum
- Modern restaurant with great old school cable management.
- Don’t worry they used 3 points of contact
- This musical instrument Im working on
- Is this contagious?
- UPDATE: Step by step attic renovation (imgur link in first post)
- Fosgate Signature Phono Preamp - Impressions in Comments
- Hardwood floor refinishing
- Application of robots
- Was precautionarily quarantined this past week and was able to make the pieces for my dads christmas present.
- My audiophile heaven. Soulution, Wadia, Avalon, rtfs acoustics
- Green Goddess
- Hellfire missile [1080x1043]
- Tool Tip: Dont have a flat tooth blade for splines (or even a small enough chisel to clean up the grooves)? Find a small flathead screwdriver and make it a small chisel!
- Suggestions: Keep the bulletin board or remove it?
Em parceria com a @kgsorensen_oficial lançamos oficialmente nossos kits de brocas!! Foram desenvolvidos baseados em muito estudo e experiência clínica. Agradecemos muito a parceria e estamos muito felizes com o resultado final dos broqueiros. Já está disponível nas principais dentais do Brasil! 😀 @trix.odonto @ampploodontologia @kgsorensen_oficial @thayanefurtado #REPOST @thayanefurtado with @get__repost__app #brocas #laminadosceramicos #lentesdecontatodental #facetasdeporcelana #kgsoresen #ampplo #trix.odonto #repostios #repostw10 - @kgsorensen_oficial on Instagram
- Bought a truck with a tiny center console under the seat so I built my own. Not fancy but serves thr purpose I was seeking
- Floating staircase
- IF you remove 90% of the powder, you gain 800% in capacity! 80+1 high capacity magwell
Not going to lie, that looks sexy as hell. The new KineticSecuritySolutions Adaptive Tuning System barrel tuner sitting on the HawkHill with GrayOps CNC MPA weight kit all screwed together by the crew at Alamo Precision and topped with Kahles 5-25. #sexy #pewpewpew #accuracy #precision #2a #competition #prs #nrl #shooterproblems #shooter #gunporn #adaptivetuningsystem @alamoprecisionrifles builder @masterpiecearms chassis and optics mount @kahles.competition optics @hawkhillcustom best barrels around @trigger.tech diamonds for days @grayopscnc weight kit and cnc goodness @americanriflecompany nucleus @patriotvalleyarms_backup brakes - @flounderv2 on Instagram
- Min pappa jobbar på Playstation, fick hem PS5 tidigt
- WWW Image
- Router table (scrap wood and some old IKEA parts)
- As I am rookie on Reddit, my first post of another room acoustically tuned by me. Wilson Audio Maxx3 driven by mega Soulution stack and VPI turntable. Hope you like it.
- My buddy politely declined running my end-grain plywood glue-up through his planer. Router sled it is.
- Sanding Station I just built.
- Woodworking - Jointer
Left: Stained Right: Finished - what an adventure it has been to do hardwood floors over concrete using @bostiktrade #Greenforce as well as @polymeres_technologies #ptech8400. I HIGHLY recommend both products. Unbelievable quality turning this utility grade wood into my living room floors. #homeimprovements #diy #woodflooring #woodworking #flooring - @itbejulian on Instagram
- I bought a new desk.
- My Smoother got a big brother
Wir haben den Bogen raus! 🤓 Hier haben wir für einen befreundeten Schreiner ein Bettteil gefertigt! 😀👍 #kooperierenstattkonkurrieren #zusammen #schreinerei #schreiner #cncbearbeitung #handarbeit #holz #woodworking #woodlove #instawood #instawoodworkers #wood #innenausbau #interior #instainterior #bedtime #craftsman - @suppelt.hassfurt on Instagram
- Extractors and Dust Collection
- 3D - TECHNOLOGY
- Ive eliminated the ping from my Keychron K4 by putting rubber shelf liner between the plate and case bottom with holes punched for the screw points. Its now quieter and has a generally more solid feel.
- I know it doesnt look like much, but this is the first functional thing Ive ever designed and 3D printed myself. Simple adapter to go from a hairdryer to our air mattress nozzle.
- Basements
- lightweight steel constructions
- Proof of Concept - Plywood Wrist Rest with Inset for Storage
- Forbidden snacks? Forbidden clacks!
- by Engineer Your Space
- Connected two patch panels to tidy up the front. Anyone else done this?
- Finally built a fence for the router table.
- Does this type of a bench have a name?
- Dining room finished
- The thirty degree woody is complete. If only the holds arrived on time.
- Built a staircase!
- that is my proposed completion design, I think I was successful in it at 90%,Did I have this nice bedroom design?,Im continuing my efforts. I want to succeed in interior design.Is there anything wrong with that? I like this design,I need guidance, in this case, you can help me.
- Dovetail Practice - chewy looking end grain, I just sharpened my chisel too. Is my chisel not sharp enough? Or is this because it’s pine wood and soft? Hoping my edges are at least clean since this stuff gets covered over by the other board. But curious.
- I love purple.
- Just finish this 8” crown coffer ceiling I’m very proud of!!!
- My new Ar SP-11 preamp
- A simple TORSION BOX router table fence.
- Estudio Fotográfico
- Just throwing in some SIG 550 s
- Home gym finished, might just cancel membership at local one.
- Fingerprints on veneer
- Custom JBL S1 Aquarius tri-amped design
- From A to B enabled
- More 3D Printed Bongs
- Broom-sweeping an empty apartment
- Got the breadboard ends installed on the 72”x72” 8/4 poplar conference table
- Laminates
- I know my setup is too cluttered. I need more room to store my stuff...
- Look what I did with that 3D Wall! Thoughts? Dont worry about the cables, they gone now.
- We have an air purifier in our house because we live in between a freeway and railroad tracks. We put a new filter in today. Weve been here 7 months.
- [photos] I made a thing. Do you want one?
- Intersection of Pine rd and Pine hill
- Colani design
- Got these speakers and was impressed by the actual cabinet construction. Havent seen plywood with so many layers before.
- Took a few tries, but made a wood Kitchen mallet.
- First box joint take 2....thanks for the great advice /r/woodworking.
- You always hear to air dry for one year per inch of thickness... I recently had two slabs from the same log that were bowed so bad I had to cut them in half. They have been drying since April 2017. The 2.5 inch slab was at 11.3% and the 3.5 inch was at 14.4% neat to see the difference.
- Anyone know of a way to tighten up these wall seems? Some sort of drywalling tape maybe? Going to be painting over everything also.
- I work at Target, this is in the back room.
- Accuracy International ASR with S&B PM II 5-45
