- A closet with power distro taped shut during huge auto show in convention center
- Whoops
- Update, acquired a R230 for a good deal! Still need to get a patch panel.
- I guess if you cant afford 26 rims and low pro tires this will work.
- My Hydroponic / Aquaponic / Irrigation Automation Project code and writeup are now published!
- Audi Parts
- I swear theres a motherboard under there!
- Headless battlestation of home hypervisors
Neatness counts! #sound #loud #Trunk #creative #vehicle #speakers #bass #caraudiofabrication #caraudiosystem #caraudiofab #customcaraudio #speakersystem #audio #audiocar #12volt #shtnonm #carstereo #subwoofer #carlifestyle #stereo #caraudio #bassheads #basshead #loudmusic #loudasshell #box #battery #cleaninstall #crossfire tag 🏷 the owner - @darealjoka on Instagram
- The thumbnail and full image are rotated right, the reddit preview is rotated left
- Just a quick cleanup at home
- What motherboard is this? I know it is Intel 3rd Gen, but I have no clue as to the rest.
- Computers & Electronics
- My Home Lab Upgrade, Still Not Done
- If anyone asks how to use the disk, they get laughed out of the server room!
- hmmm
- My local supermarket just introduced handheld barcode scanners which you can use while you shop, and theyre awesome!
- i dont know what is it, but its sick
- Vintage Microphone
- We gave u/garrettsmithley a special switch for the last 20-30 laps at Daytona. The infamous #SendIt switch.
- 300W SFX PSU + switched C14 socket + 3D printed brackets = quiet 2U PSU! Description in comments
- Her backside ;)
- I sprayed painted my rack! (partially...)
- 4Runner off road
- Took me a while :D
- Raspis evil twin brother the orange pi. If your time is valueless and your budget low its a decent offering and i plan to buy another boatload of them for some playing around. This one is the pc+ which may be a bit deprecated running armbian. Anyone else play around with these?
- Starting the 2020 with a homelab remodel!
- Recently found out that the Cisco c3750G-TS is able to run on IOS 15.. then it’s not yet ready for the trash :)
- I dont understand why the truck pulls to the right boss
- Wireless LAN cable input on the back of a Beamer
- Look Ma, a DIY Storage Array! -- The Final Build
- 5 minutes, some label paper, and scissors to clean things up a bit. Beats the masking tape I was using before.
- I ran out of storage and SATA ports.
- Please Help! I dont know where to go from here...ugh (details in comments)
- This is what’s inside of a Xbox 360
- Careful in there, it might zap you.
- Is this switch on or off right now?
- Someone suggested that I look at the high spot on the love on my cams because of wear. Ahh well, gonna put a few k more miles on her then probably junk her.
- A 850hp, nitro injected, hellcat challenger
- Cables, Cables, Cables
- 10GB upgrade started on the hosts.
- Under stairs rack - twin depths
- Ah yes, an oil-cooled PCM!
- This black projector
- I heard that some of your SOs are too short to drive a proper transmission. Im in the same boat. Being the good husband that I am, I fixed it for her.
- Computer class in action
- Need help choosing 3000w inverter. Recommendations?! Looking for 3 things. 1.Zero current draw when OFF 2. Remote switch to turn off 3. Hard wire 120v big plus
- I made a cyberdeck inspired by the Matrix, more info in the comments and on my site at back7.co
- Jetlagged so i cleaned up one of the safes and added a cheap lighting solution
- The dealership has a charging station that looks like a car battery.
- Rate my electrical setup
- Reason #7,829 I love my wife
- No 240V plug? No problem.
- Load up the 5 disc CD changer in the trunk... we’re going on a road trip.
- I cant unsee it
- When you still need a boot drive but you have no bays left...
- This screwdriver has an indent from putting 100s of hard drives into the same case
- Array of hard disks
- Owner strips screw and screws his wallet
- Well I got a hold of the schools 3D Printer. Of course I had to print a Gavin Belson signature edition logo for my server.
- Deadline of our project was impossible to achieve, so I pulled the trigger...
- I drew my wiring b/c I cant figure out why the battery isnt charging. Please help.
- Ill see your pasta and raise you...meatballs?
- Cables, Cables, Cables
- Greta tillåter
- death wave data
- Overheard a conversation about why the gas detection alarm no longer texted anyone at night.
- You dont like the manufacturers logo on the Vega fan?. Here is how to get the Radeon R.
- Van conversion wiring
- This is how you mount servers right?
- 103 Hours of german Engineering
- Just spilled a glass of water on my idrac, feeling great..... (not really, send help Im crying internally)
- Best 18 Bottle Wine Cooler Reviews
- The was this cable management has been done
- Does anyone know what this cable is? It plugs into the green connector, has a 15amp fuse, and connects to the positive terminal, and isnt the integrated tail light.
- 2u freeNAS server
- Cleaned up the rack a little.
- What kind of console cable do I need for this?
- My home network
- My UPS died last night. Absolutely no one is happy at the moment.
- Move the lab to a cabinet. Its been forever since I done some crimping!
- Cable Glossary
- Dog hair inside my electric panel
- Shouldnt cost more then 3k for labor. Wholesale
- Healthy lookin? (1mzfe)
- The relay bases that have been rolling around in my work truck for a year. All had the same screws fall out.
- hmmm
- Blower motor failed. Thought Id do a quick swap. 8 hours later...
- Rate my setup, pt 1 of 3
- I work at a Chrysler shop. Im used to big trucks and diesel engines.
- Am I doing this right?
- Am I doing this right pt2
- Can anyone tell me the name of this kind of connection, I need the other end, more images in comments
- UPDATE Dell R630 Steal
- Sir, I can see you have a professional mechanic somewhere else.
- Drive over a traffic island they said. It’ll be fun they said!
- Just wanted to share a great deal, built these raw cells up from up AliExpress, and they performed beautifully. Capacity test showed 11.96v after 300.2amps drawn over the Victron shunt, where I stopped, with room to go! Check them out! Link in comments.
- Homelab in your pocket
- 8 of M72e rackmount ready. but need more space at 42u rack
- Stepping up my game
- Reception called because they cant make any calls
- I can see where the ports on my switch go to with AR
- Dual purpose networking and washing line
- Patching upgrade
- Enclosed trailer cabinets
- 2010 Toyota Tundra For Sale
- Got a new toy.
- The way these cables are managed!
- The Home Lab under the stairs!
- I Love The Bits Of Environmental Storytelling!
- Best 18 Bottle Wine Cooler Reviews
- Just moved, setting up the homelab. Rack on the right is mostly junk. Rack on the left will eventually have a c7000 with 8 compute blades and 8 GPU blades. A super micro NAS with 12 8 TB drives and a few dell r810/820s. Super excited!
- Gutting the van and need some advice on how to deal with this mess of wires
- Is my LGA 1151 socket ok
- Id say ~25 Terabytes in two NAS machines for $250 is a decent deal 👍
- Engine catching fire after paying to get it rebuilt.
- Setup done.. For now!
- Router & Switch
- The Turing machine was created out of necessity to break the Nazi enigma code. Therefore Hitlers actions have inadvertently created computer sciences and modern medicine that has saved hundreds of millions of lives.
- So thats why the USBs were not fitting right in those ports...
- Would it have killed you to make the cord the same color?
- [RelicsOfThePast] Dual Socket Athlon (A7M266-D) motherboard.
- Good Old Peterbuilt Trucks
- Final Form LAN Party Setup and LAB
The Revolution line, powered by Picote, are innovative high-speed flexible shaft machines for cleaning, descaling and removing blockages. From the M1 to the M5, we have the flexible shaft machine that is right for your job. And, if youre looking for a specific tool or flexible shaft attachment, we also have a full array of flexible shaft tools to help you conquer any blockages. - @spartantool on Instagram
- Additions to My Space Heater Collection
Clean shot of our JL Dual ARB Compressor and Auxiliary Battery Bracket going into the @advjeep JL. This is now available on our website for the gas and diesel models. We also offer our remote kit for easy access to all of the functions of the compressor, plus it relocates the filters to keep the compressor running as cool as possible. Cool/clean air in is the most effective way to keep your compressor working efficiently for the long haul. ... #InnovationForExploration ... Learn more about our Dual ARB Compressor Bracket at https://americanadventurelab.com/product/jeep-jl-dual-arb-compressor-mount/ ... More info on our remote kit at https://americanadventurelab.com/product/jeep-jl-arb-compressor-remote-kit/. ... #Repost @advjeep • • • • • • Huntington Beach, California The #advjeep is getting what I think is one of the smartest auxiliary battery setups on the market. @americanadventurelab makes this killer bracket that holds an @arb4x4usa #ckmta12 double pumper compressor, an @odysseybattery #pc1100 and a @redarc_electronics dual input battery charger. This setup allows you to run the compressor, fridge, and more off the aux battery and not the starting battery. The #redarc can take a charge from the alternator or a solar input and requires no splicing into the sensitive factory electronics. It’s a “dual battery” system without the packaging and electronic integration issues of an under hood system. Can’t wait to complete the install. #advjeep #aev #aevconversions #aevequipped #jl370 #jeep #wrangler #jl #jeepwrangler #wranglerjl #oiiiiiiio #arbusa #odysseybattery #americanadventurelab #onboardair #onboardpower #dualbattery #auxbattery #doitsmarter #ipreview via @preview.app - @americanadventurelab on Instagram
- 3800x build ! Finished !!!!! Ouf
- Newest addition to home lab. Try #1
- Id like an open container ticket please
- Helping a friend firing up his homelab!
- Even at college level..
- Electrical/Wiring Knowledge
- Jumper cables werent giving it enough power so I had to get creative
- My New Simulation Homelab (upgrading the CPUs)
- Hard Drive holder for my Editing Rig
Despite hours of measuring and designing, I think I moved these batteries in and out three times...The real world is messy and analog! With 30 modules, the car was 1,600 lb with 56% up front, so Im gonna give the full 48 (24kWh) a whirl and see how it goes (with some trimming of the rear seat shelf)...I prolly shoulda skipped the six modules in the rear, butt fuck it, the works done! The pack is bolted through the floor and when torqued up, it is rigid. I used four strips of aluminum as washers underneath. I would like to be back on the road now please thank you #classicmini #classicminis #ev #evconversion #nissanleaf #battery #stacksonstacks - @raidenmotors on Instagram
- Ive seen people ask if you can game in a van. Heres the answer.
- The wireless car interior lights I purchased finally came 🙄
- When you have 5 sets of lights, a compressor, and a train horn... Maybe its time to invest in a fuse block.
- Whelp. There goes the power bill.
- Out of place and bastard colour in my server room....
- My Little Lab
- With a gracious donation from my dad’s company, the journey of my home lab begins!
- Probably not a coincidence that this BOSCH DME has a 🇩🇪 in the DME ribbon cable, gave us a good chuckle. 1980 633csi
- I was cleaning out my dads old work pc and now it won’t boot at all. What do I do? I already tried clearing the CMOS and unplugging everything and re plugging it. I’m really scared, this pc is my dads source of income as he does architecture on this.
- Bitcoin
- Noone: You cannot fit a D15S into an ITX, its too big. Me: Hold my beer
- Customer states : AC not working like it used to.
- Boss wanted 30 PCs imaged in 4 hours
- Vape
- If you have a breathalyzer to check and see if you can pass your car breathalyzer you might have a problem.
- My Zotac RTX 3080 Trinity has finally arrived!
- Proxmox box finally going in the rack
- Beauty shot while I do a little work on her.
- Just hang that router anywhere...
- PC Mathter Race
Talk about an upgrade! This 2014 ClubCar Precedent swapped six lead-acid batteries for two RELiON lithium InSight 48V batteries complete with a 6 A-Arm lift kit and 23 tires. Thinking of powering your golf cart with lithium? Contact us to learn more! . . . . . #golf #golfing #golfcart #golfcart #golfer #golfcourse #adventure #travel #outdoors #sports #lithium #lithiumbattery #relion #relionbattery #power #cleanenergy #upgrade #gogreen - @relionbattery on Instagram
- Mini lab! USG, Switch8, CK2, NUC server in a modified, cooled, card-locked filing drawer
- Cable managment
- Space heater was left on pointing at this poor z240
- Cant wait to rack my R905
- As requested heres a pic of the Chevy trucks engine bay!
- Stole this from a FB group. Found that turbine wheel boss!
- This 13-ft cable I found going through some old stuff. Trying to figure out if I need to keep it.
- My friends computer
- Fixing the heat in the Honda!
- The modem and router in this home are both buried in a wall behind a panel in the utility room.
- Second JBOD Unit is online! Preparing third!
- Atoll
- Leaving an Ester egg for the next mechanic needs to be a trend
- Didnt have a HBA with internal connectors laying around for my custom NAS, but did have a 8088 to 8087 bracket. Its only temporary, of course.
- Solar Lights for Yard, Garden, Landscape Design
- I dont know but at least it looks cool
- I built an Irrigation / Hydroponic / Aquaponic / RODI control system that manages 27 water zones, 8 power zones, 6 temperature probes & 4 water tanks with ultrasonic & non-contact liquid level detection. Runs on a Pi4 with Python, Flask & SQLAlchemy
- pre-Final Form LAN Party Setup and LAB
- CPU cooler expired so I picked up a new friend for my 980Ti while I was at it
- R710 in its new home.
- Clean components are happy components.
- My office computer, now with 100% more tape. Just a BRXL Suitable drive to go, and most media forms are covered.
- Electronic Media
- Day 1 with my new Homelab. Starts out messy. (Long time lurker)
- Few upgrades to the rack this week :)
- Drives not found in windows but found in esxi, I plugged this DAS into my esxi server and saw 10 drives I plugged into my windows server and only see 7 disks. I have no idea why. I reseated all disks and all have blinking lights. All run over the same external sas cable in the back.
- My Homelab, v2
- Just bought my first piece of server equipment! Cant play with it yet though...
- I stayed up till 5 am trying to make it look pretty for u/
- Meanwhile inside a random construction warehouse on the outskirts of Phoenix.
- It’s loaded and heading home! Time for the Great Migration!
- Home network is coming along nicely...
- Behold! Our quiz for today
- Build a Temp controlled PWM Fan Controller with OLED Display [Video and Infos in Comments]
- A almost finished homelab! (Minus FW)
- A students messy homelab v2, now with a rack!
- Space Heater has evolved..... quarantine has forced me to play more.
- How does it get this bad?
- Home Network
- Hate me and my dirt cheap SATA controllers. :)
- PSA: Avoid SFP transceivers with plastic latches
- When your co-workers put this away as clean
- Guys and gals.... is my new rad gonna fail?? Crimp is opened near these outlets. Kinda worried...
- DIY AUDIO
- The final evolution of my lab.
- So it begins
- This is one way for me to fill up my rack. 3D printed a Raspberry Pi (B+) rack mount...
- The humble start to my dorm room lab
- My ‘Data Shed’ Setup
- Here in my lab(tm) we have a strong recycling policy. (Go to corporate recycling events and grab what you can policy)
- LAN Party setup
- Managed to get my rosewill chassis on rails. Had to cut the middle out of the handles though
- My black and white GTX 1070 and i7-4790k build
- Made a Dual Keystone 3D printable Bracket because i didnt need = 16 Ports [Free STL]
- Future Publishing
Rangkaian Baterai ACDelco yang didesain khusus untuk tahan terhadap tegangan pengisian (charging) diatas 15 Volt yang umum terjadi pada kendaraan dengan sistem komunikasi CAN BUS; memastikan seluruh sistem dan fitur kendaraan berfungsi maksimal dengan durabilitas baterai yang sangat baik. Gunakanlah seri baterai ACDelco yang sesuai dengan spesifikasi kendaraan Anda dan nikmati performa maksimal berkendara dengan baterai ACDelco! #Chevrolet #ChevroletID #FindNewRoads - @chevroletid on Instagram
- An old elevator control board. Not in service.
- Home lab with custom rack
- C/S battery dies when parked over night.
- Ultralight helicopter
- New addition to the rack
- I finally got a rack, now time to go bankrupt again...
- Network Upgrade - Birthday
- Previous owner wanted a sub panel in their garage, so they tapped the bus bars with #10 wire instead of a breaker.
- All this for a 50 cent gear.
- Showing off my setup. Dell R710 12-core 2.9ghz, 192 GB ram, 36TB Dell Storage Array, Ubiquity Security Gateway, Ubiquity 48 Port Switch, 1500va UPS. Running VMWare ESXi with 8 vms. Rack cabinet is from Tripplite and side mounted 12U.
- Part II of custom Raspberry Pi cooler
- Nice and parallel
- Winter Re-Rack
- Upgraded to a short-throw shifter for the day.
- Are these still a thing? View from the cab of a hydraulic mining shovel (with bonus baby shoes)
- Decided to clean out the microserver after 4 years of 24/7 use... NSFDH
- Gotta start somewhere!
- So I decided to mess around in a Windows 10 virtual machine.......
- Cables, Cables, Cables
- Finally got it in a good spot.
- Thats exactly what it looks like...we have the next level of geniuses at work.
- Room for another 2U. What should I build?
- All the cables are ziptied to each other
- Is this even legal in some countries?
- Finally did a writeup w/ some photos!
- Structured Wiring
- Homelab 2.0.WasMine
- Network Rack Tidy Up
- Homelab, Help! What did I just buy?
- Its flood-proof at least... (source: @crach60 on Twitter)
- Finally got the homelab up and running.
- Opened this PC up to find that it died of second-hand smoke. Its been a year since I quit - any bros struggling?
- Did a pre-move down-sizing. Very happy with the result.
- My upgraded budget homelab!
- hmmm
- Todays haul 2 x R510s E5620, 16gb and 8 X 300gb drives each
- Console and Management Server + Terminal and KVM. Amazing what an angle grinder can do.
- Got my new switch today: Juniper EX3300-24p (24x1g rj45 with POE and 4x 10g sfp+)
- Here is the support rack to my battle station. There is a 120TB of data moved around on my 10GB network there.
- Factory worker didnt bother to strip fuel pump wires before crimping terminal on. Made it 35k miles this way.
- You all loved the switch last week, figured I’d post the server restack I had to do to make room for the additional UPS it’s gonna require.
- Finally got it all cleaned up! This is where the magic happens.
- Well with over 500TB of spinner storage, time to add some all flash storage. Soon to be filled with 24x 500gb SSDs for VM/HPC storage.
- Confessions of a home lab veteran
- Bought used servers on ebay. From Yahoo! Apparently.
- Operating System Choice
- I got that $300 switch I wanted
- One rack to hoard...I mean hold it all
- Psst, Want Some Cat6?
- Fine! Your showed me your, So Ill show you mine.
- What an underground homelab becomes.
- All wired up! 2 Battle born lithium ion 100 ah batteries, 3000 watt AIMS pure sine wave inverter, Renogy Rover 40 amp charge controller, Battle born battery isolation manager ( wired to van alternator), a battery isolator switch, and one rad dad who kindly wired it all :) Almost road ready!
- Swapped two screaming MSA50s for an MSA70. Best (albeit small) upgrade Ive done so far.
- If this man can charge his electric car through his cigarette lighter, why dont we use this technique for an infinite energy grid?
- Finally got some blanking plates to cover up the shameful gap.
- Is there anything usefull I can use in my build from my uncles old pc
- Network and security
- Everyones 3D printing caddies and Im just here screwing hard drives into any space theyll fit...
- It doesnt work properly.
- More cool factor: short patch fibers for uplinks.
- Did I do good? Nearly free
- Customer installed their motherboard they purchased from online and was confused as to why they couldnt plug in devices
Some close ups of the S15 SR20 loom from the previous posts. #guldstrandpro #motorsportswiring #240sx #S15 #SR20DET#raychem #DR-25 #Tefzel #Spec55 - @ebturbo on Instagram
- RV Internet
- Came in for a no start... Send Help!
- Home Lab Progress
- Its getting there! Basement datacenter 2.0. More pics in the comments
- Humble, but Mine! Finally got everything racked after moving, cable management is less than to be desired..
- Interesint swap .
- E28 BMW
- Sharing my rack where I keep my cutely named servers and desktop. more like racktop
- Say Hello to The Dragons Nest
- The wire on the right is to engage the starter and the alligator clip on the left is in place of a j-case fuse
- But.. expensive..
- I made external Hdd support. File is on Thingsiverse
- Leak testing my monochrome 3800x build. #laurentschoice
- The 25$ rack gets DIY air filter
- hmmm
- Boat Wiring
- Retired the Dell PowerEdge 860s
- No matter how hard I try, I can’t get it in. I’ve bent the things to the point where it shouldn’t interfere with the insertion but it still won’t line up with the standoffs. Tips?
- This pc I got has the mic jack at the back and all they around the front is for the headphones, it was titled gaming pc, but wont fit typical headsets and doesnt do Bluetooth that well either.
- Thats a new way to mount a hard drive
- Rate my cable management. First build ever.
- Cursed_computer
- Hello lithium, nice to finally meet you.
