ramshackle ss



- Do I warranty it or hang it on the wall?




- This made filling up the gas can for the mower kinda nice.

「 ✦ ᎠᎬΝᏦᏆ ✦ 」

🍂FROZEN II🍂


- Florida life be like

⚡️no, I didnt.. you want to believe that.. in order to continue being mean to me..🌩



- Someone screwed up the gas price at my local gas station. Full tank for $$3.10

my beloved



- Babysitting our office dog for the weekend. I think she likes it here :)

yall know who it izzzz🎀



- PTO adapters: now with thread-on splines!

ʚ♥︎˚•𝕜𝕒𝕨𝕒𝕚𝕚𝕔𝕠𝕣𝕖 𝕡𝕗𝕡 𝕚𝕕𝕖𝕒•˚♥︎ɞ



- C/S vibration from rear at hiway speeds then loud noise and won’t drive

i can already hear him



- Re installed the throttle body on this 08 Lancer and the ECM doesn’t reach to plug back in. I don’t get it, pretty sure the throttle body only sits in one position?

Memes



- This is where Id put my spring... if I could compress it enough!




- First time Ive ever seen this happen

shigaraki tomura

Donnie Darko Bow Icon


- Can you mow my tire.

~ tadc bubble ~



- (Not so) Little pupper asleep!

Spectra and Kiyomi matching pfps (Spectra)



- My emotional support pup doing her job in the Uber

• ̥ ⁺ ☆ 💉🩸 ૮ ◞ ⸝⸝ ◟ ྀིა 천사 인형 🪓 V4L4K !! ᝣ 💤🎀 ͙ ⁺ ૮ ๑` ´๑ ა TH3 NUN 1/2 ˙ ․ ╳ 🥩✸🩹᪺᪳%

‘Today I Learned’: 50 People Share Fascinating Things They Didn’t Learn At School (New Pics)


- Cricket the pug got sleepy

ayesha erotica pfp !!

𝒟𝑒𝓃𝓀𝒾 𝒦𝒶𝓂𝒾𝓃𝒶𝓇𝒾


- Hey folks. 2011 Citroen c4. 1.4 petrol. Installing cabin filter. Airflow up or down? The one that came out didnt specify.

But was an accident! He had good intentions! so did Gwen the entire movie?

POV: 🥶💚🖤


- Is this short hose the upper radiator hose? 3.0 Duratec?

Music is my life because I have no life

GUYS SORRY was so busy today i literally forgor to post all my prepared posts for today 😭


- /screaming



- Nah, aint nothin wrong with that control arm.


- The most seized wheel bearing Ive come up against. So far.


- Do oil filters take one ugga dugga or two?


- Customer states “I think I have a misfire, and there’s also a really fast ticking noise coming from the engine as well”


- sometimes is the little things that make my day a little better


- Think I found the source of the vibration.


- Uh.. What?


- My big boy Roughhouse laying with his favorite pillow that he carries everywhere.


- Cabin air filter housing almost packed full... The a/c worked just fine somehow


- For those who asked what can happen when the neck is not secured right. This is a smaller roll that completely broke you can see the inside of the neck on the right.


- “Just started grinding”


- Roadside repairs (and the wife looked at me funny when I picked up the stray bit of wire)


- My otherwise completely brown chocolate labrodor has tiny white arm pits.


- Not this time Chrysler!


- Working on a nissan sentra for our used car dept. Tech that did the ised car inspection says breaks are good and should pass mvi no issue.. Broke both pins off in both rear calipers everything is so siezed


- What is this rod with a joint at the end. And does it look like it needs to be replaced? I thought it was a tie rod but I’m double thinking myself. And what is the 2nd one. I’m having really bad steering and creaking noises and I’m trying to self-diagnose


- Tensioner pulley got free and is trying to dig its way back to china


- Spotted. Vintage Lambo. Slightly OT


- Rusty Chevrolet vs. Midwest Potholes


- Zero had 21 toes. Gonna miss you buddy.


- Minor frame rust


- Dont laugh, need this solved in 4 hours


- Just finishing brake seals on Dana 213 in time for the weekend 🍺🍺


- Biggest lesson I took from my welding instructor- If the job will only take you 5 minutes, tell the customer (in this case, internal to the company) that itll take a few days or next time theyll expect it in 5 minutes. All I did here was torch out the end of a broken pin. Now it can sit a day. 😁


- 2003 Ford F-250, finally found that radiator leak on my truck.. how should I fix it? Maybe move first hose clamp forward and add a additional one behind it?


- Shoutout to whoever did the alignment for this wrench


- What is this? 1989 F150 with a 5.8L auto.


- First post here, City employees seem to be pretty oblivious.


- He refuses to lay down in the back seat 🤦♀️, so this is how he sleeps in the car


- The owner refuses to get a new forklift


- Any tips to help remove the screws on rear rotor on this 00 Honda Accord


- She really likes her car rides!


- Brought to us by a local body shop after they replaced the sway bar links


- I wish we didnt see this as often as we do.


- Help. 20”1 Volvo V70. Previous owners ran everything down with an impact. Was rounded out and tried heating it, tried sockets made for rounded out bolts, tried grinding a flat edge, etc. I just want to change the freaking oil.


- “Drives fine, just has an odd vibration”


- C/s heard something hit the bottom of the truck and then it shut off down the road


- My Projects


- Any idea what it could be coming from. Looks like the hose to me from the spray pattern on the radiator


- Easy, breezy, beautiful


- fly wheel peek a boo


- Customer states vehicle sounds like an old beater truck.


- Zero had 12 toes. I hope my best friend rests in peace.


- Posted in here last week about a stubborn Jeep lug nut. Again, I cannot emphasize this enough, that this is not my doing.. This is what has become of it, thus far. Now what?


- C/S breaks are a bit squeaky


- John Deere Art


- I took off a wall vent and saw this. Looks like a button.


- Outer tie-rod almost touching wheel 2011 Tacoma on 6 inch suspension lift with after market wheels, is this an offset issue or is this normal? (Purchased this way)


- Customer (another dealer) says long crank/ no start. I wonder why.


- I thought I blew a head gasket on this 3k mile crate engine. No such luck.


- While trying to troubleshoot a problem with my metal lathe, I accidentally took this aesthetically pleasing photo.


- It was only supposed to be a quick brake change. Both brake saddles turned out to be stuck from the generated heat and needed to be replaced.


- Nothing better than sitting with Summer after a long day


- Please disregard the block of wood holding my tierod in place.


- A sad moment...first day with the new tractor and I broke a tooth. I have a replacement coming from the dealer. But for future reference, anyone have a website or company they like to use for parts?


- Wishing someone would flash me back


- Yall keep saying normal cars on big wheels are shitty and it needs to stop!!


- Is this normal? Doesn’t a strut supposed to be in the middle of the spring?


- So close yet so far


- Just took the rear forklift tire


- I was on the highway and the car just stalled. (1998 audi a6 Avant)


- 2000 Honda Accord 2.3 manual oil leak (extra pictures inside)


- What are these two things hanging down by my rear wheels?


- I spy with my little eye... Some forgotten pliers..


- Their wheel got struck by lightning...


- HELP: Can’t access Oil Pressure sending Unit. Got my hand stuck in there for a good couple minutes, not doing that again. How do I reach this unit to undo the clip? This is the only angle I can see it from


- Lowering kit


57 Chevy truck ifs conversion - @jb_motorsports on Instagram


- my rotors are warped, can I get them turned?


- i took off all of my spark plug wires at once to replace them. does it matter which one goes to which cylinder?


- “Poor mans loctite”


- Service contract: “We need you to disassemble the cause of failure”


- Found a new leak on My own 02 F150. Rear axle seal


- By some miracle, this actually did roll into the shop. And thankfully for some new shoes.


- Uuuuum, I should probably replace these, right?


- C/S: Car wobbles while driving


- Lift axel doesn’t lift, wonder why??


- Peanut butter stuffed axle, yummy


- C/S the shifter suddenly disappeared.


- PsBattle: this ford tractor in a barn


- Worst Ive seen in person


- Stuck with this ball joint bolt rounding off.. Ive used all kinds of spray liquid wrench pb blaster its just rounding off and im thinking im kimda screwed..


- Its not often I see a rack and pinion roll into the truck shop

- C/S forgot to re-mount steering gear box after pitman arm job before driving. I’m the customer. Tore the boot on the steering shaft as it bound up against that heat shield. How screwed am I? 98 Chevy K1500.

- Took a tire off a car today at work and found this little guy smiling at me

- Is this my thermostat housing? And Is the bolt missing a set screw for the heater core hose? Had like a metal extension on the end of the hose. 2000 Acura Integra. Owned it for about 6 months and has always used a little bit of coolant, hoping I found the problem.

- Splash shield came half off on freeway. What is this stuff in my wheel well behind the right front tire? 2004 G35x.

- Pretty significant dripping of water coming from exhaust where the header pipe meets the muffler pipe. Any cause for concern?

- Any tricks to lift this into place? Medical issues made me lose most of my strength a few years back and I cant lift it at all.

- Sport tuned exhaust

- Zap!

- Can you plug my tire lol.

- 2016 F350. Only 27,000 miles on it. Yes, thats mud and ice.

- Snow on the roads. Accidents happen.

- We recommended brakes, he decided to do them himself.

- Can I stuff it all in your [M]outh?

- Customer came in for a new set of tires. Check out the size of these brakes.

- BMW N55 rear ignition coils filled with water.

- Is there an easy way to replace this kind of tube? Its hard rubber, so I assume a pressure tube? Object is a connection tube from air intake assembly into a steel tube that runs along the bottom of the intake manifold and looks to merge into a few sensors and pipes on the back of the intake mani.

- Life is Ruff

- Call the bomb squad

- Steering ram bracket got ripped off, terex400

- This is pissing coolant, what is it? 98 k1500 below radiator cap.

- Talk about cutting it close.

- The clutch on my aircompressor isnt working(its a gasoline engine). I tried googling it but all that comes up is air conditioning clutchs. Anyone know where i can get on of these?

- Anyone know what this piece is? 95 Toyota 3.0l

- Slightly corroded battery terminal - 2 y/o battery

- The joys of the Northeast. 6.2 Ford manifolds

- I dont like sand. Its course and rough and irritating, and it gets everywhere

- CS: AC isn’t working right

- Rolled into the shop the long way around. 950 miles long.

- Im not a mechanic, but I did stay at a Holiday Inn Express

- Question about tire deformation

- 7.3 oil pan replacement

- Animals and Pets

- Yummy

- Customer and his exhaust were not happy about the repair order quote.

- CS caliper locked up and had it towed to my shop.

- Customer: I just slapped some loose rotors on that I had, I think they fit....before and after we fixed it.

- Tube socks axle tubes

- (2003 Acura TL-S) Rats chewed through some wires that start at the transmission and go into this wiring harness. Anyone know where I can find info on this/how to fix?

- You are my squishy.

- Little Frenchman had a ruff day!

- Cool toys

- she’s the cutest lil baby

- This reminded me very much of the Nepotism episode where we don’t don’t bother Luke.

- This Lamborghini tractor

- Does anyone know how to disconnect this connector that goes to the engine harness of a 302 1995 F150?

- All 5 were there when AAA changed the tire 5 minutes ago

- “Can you weld it?”

- What bolt is this on my IAC for my 2003 Corolla?

- Lube tech lifted it off the ground and immediately came and got me

- C/S Brakes started making noise

- Nissan 3.3l engine I got 4 pistons off I can’t turn the crank to reach the next rod cap. I bought this engine alone for a swap, this engine had a blown head gasket. Why is it locking up on me the pistons slid out easy

- Maybe the swaybar swayed too much?

- Good job Toyota that’s a perfect place for a starter!

- Just rolled in for tires, first one Ive seen worthy of posting here...

- Sometimes it’s best not to ask how this happened...

- Radius arm held in with cable and hose clamp

- C/S feels a little rough on bumps

- No sir, we absolutely cannot resurface those rotors.

- Terminal looks fine to me

- Our dog is 99% front legs

- Anyone know what the little white box on the side of my fuse box is for? 2000 jeep wrangler 4.0

- Put a heated blanket on a chair and turned it on. Went to get a snack and this is how I found my service dog when I returned. Think he likes it? I sat on the couch so he could enjoy it.

- My dog decided to sleep on my book bag today

- Never in my years have I seen a belt tensioner mounted backwards

- Hows your Friday going?

- Concern was ‘brake noise’. Turns out it’s just broke(n) noise...

- Customer complaint, “When I rev the engine the entire car shakes like it’s going to come apart”

- Wife is away for the weekend, here is how we spent our Friday night.

- co workers had the same fitting on his impact for 20+ years

- Booster hose collapsed?

- Is this a fuse? I haven’t come across any like it but figured I’d ask since it was found near civil war and war of 1812 artillery relics.

- My car doesnt like to start sometimes, I dont know whats wrong.

- Sleepy time after the park

- Customer DROVE this in complaining about his steering feeling weird.

- Our operator is having a bad day

- Neighbor quieted his son’s annoying plastic quad wheels, and added traction

- Damn it

- (self) My u-joints gave up at 55 MPH. Scary stuff

- Ideas for removing this rounded off, insanely tight caliper bolt before I take it to a shop? Was already rounded a little before I started, but I definitely made it worse. Bought the car to fix and sell for a quick flip so I really dont want to take it to a shop if I dont have to. 2004 Grand Prix.

- Shed antler flattened my tractor tire.

- “Brakes don’t feel like normal”

- My free mk1 rabbit just rolled into my garage...

- Ill give em an A for effort

- C/s don’t worry I’m an electrician

- Was like this on both sides, customer declined repairs and insisted on still driving it.

- Driver had no complaints about braking issues. Just in for a pm. Apparently dude does no pretrips and cant notice a super heavy pull to the right or the dangling slack. Oooof

- Are my brake pads ok? Massive squealing when turning left.

- This was in a corvair monza at the junkyard.. radial aircraft engine??

- A Xenomorph emerges from its host.

- Well boys and girls, today I did the dumbest thing Ive done in a long time. Worst part is I knew better and that voice in my head told me not to lol. Believe it or not i was able to get it out in less that 20 minutes. Ill add I felt sick to my stomach when it happened.

- C/s check transmission it feels funny

@pskl_mzla managed to crack his clutch case and thats the only way i could think of patching it up. Seems like carrying some fast Mseal would be an great idea and will not force us to return back home 💪🏽 . . . #impulse #heroimpulse #advindia #enduro #hardenduro #xpulse #xpulseriders #xpulse200 #jungle #forest #offroading #dirttrack #ridehard #trainhard #motolife #mx #dirtbike #endurotraining #heromotocorp #heromotosports #goprohero4 #hero @advindia.in - @surajgirii on Instagram

- Anything wrong with using a nail as a cotter pin?

- My sweet new baby Lulu.

- My license plate was barely hanging on after 700km of corrugated dirt road! (pics of the ride in comments)

- Torn is a little bit of an understatement...

- Thanks for the help! Wanted to thank everyone for the help the new chain is on the ranger and is ready to start reassembly! Thank you!

- Need advice for removing this stuck bolt connecting the drum brake wheel cylinder to backing plate.

- Just dragged off the highway. It just started..... Uh huh.

- I’m guessing it’s been sitting for awhile

- C/S: My friend let me drive his Escalade, but it doesnt feel right.

- Regular customer in for his monthly oil change (6000+ miles every month)

- Yup

- 1967 impala lower front control arm bolts. How to remove?

- Cust. Sez Cant you just replace the pads? Me: what pads?

- Was replacing my shocks and noticed my leaf springs were a little wonky shaped. Should I replace them while I’m working on the rest of the car? Not hauling heavy loads often anymore. Mainly just holding on the truck since it was my first vehicle I’ve had.

- What is this clay stuff I’m looking at? 07 Dodge Charger RT rear. Thanks!

- Gas leak from that piece / wire, what is it please ? Thank you - Riding Mower Ariens V-Twin 46

- What are my options?

- Just rolled into the shop with these custom exhaust header coils .

- c/s car is more clunky then it used to be.

- I think I’ve been accepted by my girlfriends dog

- “White Super Power” classic semi truck

- On a 46 foot trailer. Driver was driving with the E-brake on. They got so hot it melted the seal and ignited the oil inside. Had to put it out with an extinguisher.

- 1993 f350 just drove 30 miles then saw this is disconnected after a 3 inch body lift. What is it?

- woof🤨irl

- Dads bff and my fur-brother

- Update: 04 envoy rear end swap. This is the old one. Only problem was passenger seat bar linkage had a stripped out Allen key. Cut it off and bought a new one. Never did it before but I had a neighbor help. we were done in 3 hours years were definitely cracked and missing teeth.

- I am not a smart man

- More of Maya!

- 30 year old cam bolts. 1990 corolla. I just thought it was amazing and the you all would appreciate it.

- What is this? There are 3 fittings but I have no clue where they go. I dont even know what this is. Its 1980 CJ5 with a 304

- Customer drove into the shop saying I hear a pop on the highway and its been acting weird ever since

- Wish I could be a fly on the wall during this meeting...

No!!!!!!! - @humans_of_og on Instagram

- Bolt to my 96 Ford Econoline bumper bracket. How do I remove without cutting it off

- Customer states brakes locking up

- In for a brake inspection. The customer actually said no and drove it home

- Just purchased with a safety certificate. My car makes a loud bang over bumps?

- thats safe.... right?

- I’m about to do my front brakes, anything I can do about this while I’m down there? Been driving on it being all black for a while, the liquid dripping from it is pretty clean

- Something is missing....

- So yea this rolled in.... both calipers zip tied to the leaf springs, yes the customer is aware . Rolled it right back out.

- 2013 Jeep Grand Cherokee, slight rust problem.

- You guys are using scare tactics to try and scam me!

- Didn’t hear a thing!!

- Excellent start to my week. 12 hour ticket on a 3500 Silverado.

- How my brothers dog fell asleep in the car.

- Owner stated I did it like that so the brake line didnt rub the tire.

- Patterdale Terrier Dogs

- One more plug should do it.

- Nice Bulge

- Brake lines shouldnt quite look like this.

- C/S tow in needs new fan belt, belt broke while driving. Belt in car

- Hit a pothole and now the gearshift is crooked and wont go into 5th or reverse

- This little monster greeted me while swapping a header last night

- C/S friend put on new muffler a month ago still loud, can you check for exhaust leak.

- “This is my pupper, there are many like it, but this one is mine.” - Meet Murphy

- Customer says brake noise

- 5 hour ride home feels

- Why must you be like this, Nissan.

- Can you just turn the rotors?

- 1993 Ford F-350 7.5l gas. What is this? The only tube connected to it is disintegrated. When I push the metal stick coming out it moves in and out with some sort of suction

- Started the morning with a stripped lug stud. Last nut to take off for a rotate. Drilled it out and carried on with the day.

- Curse of the 10mm Socket: I wanted to thank you all for the 10mm socket posts. Recently got the courage to wrench on cars & was replacing a Grand Prix door actuator when I lost my 10mm socket in a channel in the upper part of the door frame. All I could think of was THIS SUB. Pic somewhat related.

- Dat BMW rotor rot is back

- Lift blocks !

- C/S: I think the brakes on my trailer are getting hot.

- Is there any way I can drop this cross member and oil pan on my 1992 12 valve without removing the engine from the truck? it doesn’t appear easily done if even possible

- Lug nuts...please make sure they are tight.

- Do I need new rear rotors? 02 RSX

- 1992 Dodge D150 blew 2 fusible links while driving. Can I just splice new wires in? Or is there a short causing this?

- my brakes make a noise

- Our little lab exhausted after playing

- 2000 lb. Bull getting his hooves trimmed

- Im hoping this guy didnt drive far like this...

- Noticed while changing the wheels, cracked all the way through.

- Biggest soap bubble Ive seen

- Oh my

- I couldn’t for the life of me get that trailer tire loose... so I had to improvise.

- Found my dog sleeping in the living room...

- Help! 91 explorer 4.0. I can not get the temp sending unit to screw back in... any suggestions?

- Seems legit..

- A random good boy said hi

- Friday gore thread, go!

- Well this just happened! Snowmobile pitman arm snapped.

- Not gunna lie sometimes these guys impress me.

- Some sadistic fuck works at the Freightliner factory. May as well leave a razor blade on the engine

- Cheap easy way to make your exhaust louder!

- Just a little extra weight....

- there was a larva in every port preventing a connection

- C/s The truck just quit starting. I tried everything! (Except looking at the starter)

- Anybody else hate these with a passion?

- Now thats some weld porn! /s

- WILLYS

- Guy couldnt figure out why this motor was seized. Turns out mice had been hoarding canola seed in the clutch cover.

- It finally happened to me guys! Found one on top the transaxle of this 2010 Sportage while changing the rack and pinion. 😲

- It’s a Jeep thing

- Is this suspension safe?

- Old guy with a 1999 F150 changes the oil every 10 years or 100,000 km , whatever comes first!

- So this this plowed straight into our shop

- What causes this?

- Had a 14 honda accord in for a brake noise the other day, pads and guide pins were badly siezed resulting in some of the worst tapered pads ive ever seen lol. And yes i did pads and rotors on it

- We can still get a few thousand more hours out of this tire.

- Before I change my gear oil

- Ford 351m engine. What is this little tube that runs from the carb to a plate on the intake? Its rusted and gone away. It come from the carb where the round thing says lean

- Feels like it needs an alignment

- Went to do brakes and found this suspension link with nothing connecting, is there meant to be a bushing? What is it called?

- “Take my hand. Never let go”

- Caught this during the out QC after a group of trainees did some front end work
