- @unreal_plates on Instagram
- My buddys car had a bad miss in it. Then I found out why.
- Actually drove into the shop.
- converting truck to electric
- 355/25 R21 Pirelli P-zero
- customer didnt mention an overheating issue...
- Whats the damage to my tire? Looks like someone cut it off is this easily fixable or do I need a new tire?
- How many clamps do you need? ALL the clamps.
- Get that meaner, louder sounding exhaust for cheap with this custom exhaust spacer mod.
- Alligator skin...wheels? (Had to take a quick picture. Car belonged to a customer).
- Customer states there is a weird noise while driving.
- Damn stowaways!
- Workshop Wednesday! Did anyone order eggs this morning? Customer complaint is that there is a vibration. There is literally an egg every 4-6 inches around this entire tire. Looks like a wave throughout the whole tire.
- Ive been working tirelessly on building my cbr fs2 into a full on race bike. Ive input countless hours and monies, had the head spark eroded after some snapped manifold bolts. Today, my heart crumbled once more...
- Auto and Car Stuff
- 07 Honda Civic what’s going on?
- Acceptable Truck Nuts
- Our operator is having a bad day
- What in the rim are those?
- Where do you get the grease( yellow) like this for sewing machine?
- People are so dumb when it comes to wipers. Ive seen wipers installed in every possible way. It bothers me more then it should
- Engineers will walk over a thousand virgins just to fuck a technician
- C/s needs tire repair
- C/S car shakes violently above 40mph
- Hood-scoop is +10hp bringing the total to 30hp
- Had bad vibration on the rear since installing new brakes
- Recommended motor mounts a long time ago. Finally came back for them.
- To be fair, there was zero vibration.
- What to do when you have alloy wheels, but really lime the look of those plastic wheel covers....oh, dont bother clipping the zip ties.
- The text itself is trashy, but the Celtic font over the Pittsburgh skyline, and the fact that its on the back window, just throws it directly into shitty.
- So I had no filter wrench. Sue me.
- Because for some of us life cycles around the D.
- Time to rebuild another slinger tire. Harvest is in full swing!
- After 17 Years In The Business, I Finally Got One.
- Forbidden pop rocks
- Rolled into the shop a little off.
- That. Is a very well constructed pole. My driver is the reason why I would never want to be a fleet mechanic.
- Customer felt slight vibration while driving highway speeds
- Im not a mechanic, but I did stay at a Holiday Inn Express
- Her vs you
- Question about tire deformation
- I rode on a recently-milled road yesterday, now my headers and engine are covered in a gritty, baked-on layer of asphalt. Help?
- Is this crank bolt reverse thread? 1995 honda civic, doing the timing belt and it doesnt seem to want to come off, just want to make sure before I give it a lot of uga duggas
- 747 Tire Change
- 91 Nissan Hardbody. Outer bearing welded itself to the hub and sheared off the spindle.
- Hard to tell but some jack nut epoxied the block back together. C/S oil leak.
- Street legal slick?
- Car In made of phone cases(OC)
- Cursed_cupholder
- How to secure house hold appliances (xpost r/WTF)
- Led by a lesbian lieutenant
- Automotive Basics
- For even greater burn to ball ratio. EVERY DAMN TIME!
- Ay, yall do flat repairs??
- Customer complained having to put air in the tire every day.
- The sun left a fog outline of my steering wheel on my windshield
- Customer states oil leaking, but claims they didnt hit anything. So long transfer case 👋
- customer states abs not working 2000 2wd Tahoe
- Is a gallon tank too much to ask for?
- I’m getting a bad oil leak from the oil filter every time I turn it over it just seaps out the sides. It was sealed for about 3-4 5 second turnovers but when I added some fuel to the mixture it started leaking again. I’ve made sure it’s on tight but not overtight. Chevy 350
- Not really sure what he was trying to accomplish here...
- Blursed_truck
- Outer tie-rod almost touching wheel 2011 Tacoma on 6 inch suspension lift with after market wheels, is this an offset issue or is this normal? (Purchased this way)
- Bro, hows the weather in Wellington today?
- So... uuuuh... is this bad?
- You gotta keep em separated .
- Miss me with that Ecoboost
- Rear original tires, 2006 Corvette that was traded in.
- I thought because you guys were a tire shop you could patch this!
- CS grinding noise when driving.
- I take your bald tire on a minivan on snow, and raise you a tire with a cool design on it
- Cabin air filter housing almost packed full... The a/c worked just fine somehow
- Lovi g these new 3 piece clutch kits from ICantDriveStickButTryAnyways. Oh, anf the flywheel looks just as good boys.
- What does this pattern on my front disc mean?
- The owners make the difference...
- C/S its not the fan. I can hear the fan running. Something must be blocking the air.
- C/s he doesn’t give a shit
- 2017
- Brakes on the $375 Cavalier I bought
- Screw bits that can only be be opened with a screw bit - best catch 22 since Needing Experience to get a Job
- Boss- How close are you to loosing your shit?
- When your tired of hitting it withe a hammer. Whip out the 6 ton puller. When it finally broke free, it left the hub doing like Mach 2 towards my face. Previous ninja training prevented injuries.... Lol
- My new personal hero
- The new delivery guy showed up and pulled into the loading dock the wrong way and jack knifed the truck
- Exposed carbon fiber wheels on GT500 carbon track package
- *facepalm* customer came in saying their spare is flat
- Car wouldnt start today, found this furry asshole chewing on my engine harness.
- Next level modding.
- Headed to a shop near you
- Blursed LIFE van
- Customer states: While driving on freeway heard a pop, then tire went flat. Towed in.
- Was at the body shop that my pops works at over the weekend. I like the decor in this place.
- hmmm
- Didnt puncture. She was pleased she got to work on time.
- 996 4S
- I found a Yugo today in traffic.
- Datsun 510
- 2007 Pontiac G5 Wearing on part of edge of new rotor. (Details in comments)
- Even has Carbon tail lights
- no hoist? no problem.
- Home Depot this morning.
- C/S tire went flat over night
- Ummm....
- Customer states “interior smells like mold”... the spare tire is literally floating.
- A wild Fake Taxi spotted in Cornwall
- Spare time and cans of spray paint.
- hood cleaning
- 3 inches higher and a foot might have been lost today. Stay safe people.
- Do I need new rear rotors? 02 RSX
- CS “Heard a noise. My tire light came on. I don’t know what happened.” Pulled 3” piece of rebar out of their caliper. Pierced the tire and shot straight through the rim.
- As seen in TV.
- Golf cart repair
- Customer said Im relieved it was stolen and not just my car falling apart. I wanna know what blades theyre using.
- Not much is rolling in today...
- Auto Repair
- Hes cutting weight for that high speed of 60 on I-35 in Kansas.
- Care making loud revving sound. Could this be the problem? And how would i fix this. Toyota Camry 2000
- This guy thats watching tv while driving
- Blursed Bowser
- You might want to consider an alignment check...
- [73 CB500k] this jet(?) Was just loose in the bowl and doesnt stay in place. Help.
- My license plate was barely hanging on after 700km of corrugated dirt road! (pics of the ride in comments)
- Pads are fine, I changed em myself
- Do this Qualifies, Jardon / Dont imagine the sides and front of the car.
- THEY DROVE IT TO THE SHOP LIFE THIS, IT MADE NEW TECTONIC PLATES ON THE WAY INTO THE SHOP
- What the nut? New nut on a new aftermarket axle shaft
- My Jack paying respects to a broken 0 lug nut. Unfortunately my own.
- Sweet fender flares.
- Give me that wrapped in aluminum foil to go look! Say no more, got you fam.
- Missed the truck
- blursed_wheels
- Fuck wheel cocks.
- Shitty but improvised car mod
- Chevy C10 PS Leak
- This poor lady didnt even know it...
- Thank you doorman for fixing GMs plastic miscarriage
- 6 outta 10 aint bad
- Someones missing a screwdriver
- Customer complained of a wobble in their brand new tire.
- This truck has a fishing pole for an antenna
- c/s It had a wicked wobble from 25mph up. 04 Silverado passenger rear
- Someone suggested that I look at the high spot on the love on my cams because of wear. Ahh well, gonna put a few k more miles on her then probably junk her.
- Talento hay.. Solo falta apoyarlo
- When the bead is reeealy stuck.
- Business in the front, party in the back... with a Honda rear wing
- Not exactly a car, but its being towed by one and fits the other criteria- so it counts.
- Repurposed two sets of SALE lettering..
- It got warm then froze again, this truck is frozen in several inches of ice
- C/S “just started making noise last week” Dude your Dodge is gunna need a new transfer case.
- A disk attached to the wheel hub of a late model white Ram pickup. It has a rod supporting a cable connected to a bed mounted tool box. There is also a white box mounted under the truck, forward of the rear wheel, which looks like ir could be related.
- 2015 Civic came in for a safety inspection with 200 kilometers on the odometer. Ive never seen a drum brake this clean. It passed.
- Dont laugh, need this solved in 4 hours
- Here’s more from my winter beater Mazda 6! Cabin air filter this time
Here is a Charger Daytona from Michigan. There is a wild story behind this one. - @mplayer426 on Instagram
- Arc Welding
- *Update on the ladder.* They had to buy me a new one because it accidentally fell under my truck while I was pulling out one day.
- Guess what? It was still fucking flat
- This twisted drag car wheel
- I dropped a steel rim and had a nasty bend on the outer lip. Tried my best to hammer it back to shape with circular gym weights and a hammer. Is this good enough for wheel balancing?
- +5hp per sticker
- TGV (train) hit something at 300km/h. Not disclosed to me what it hit. But there are e few antennas missing... (all attached to the under tray, which is missing)
- C/S doesnt need new air filter.
- 91 Civic second head gasket in 6 months.
- 1972 olds 455 with 60k original miles.
- 24 rims mounted on a 1995 silverado with more chrome than you could imagine
- Good name for company
- Camping
- Close enough...
- Custom truck parts
- customer states coolant replacement this is the valve train. I removed the valve cover. Looks like melted chocolate! They fucked. Lol
- I do small engines too
- “Drives fine, just has an odd vibration”
- Looks more like Im walking back to the shop.
- So the soft serve chocolate ice cream machine rolled in today.
- Had some weight to it
- Snappy red taco x runner showed up today.
- Hydro locked engine? Just pull the sparkplugs and crank it they said....
- My crank pulley started showing signs of puberty. Its growing hair in places it hadnt before.
- How To
- The best type of headlights
- use your...imagination
- From a co-workers service truck.
- Cold snap in Texas gave me free spinners
- The Bitch Is Back
- Ran some uv dye though my 1990 suburban that blows a charge in about a day. Does this look like I need a no compressor, or can I just pop off the hoses and change the lines?
- I just finished changing my first timing belt- I feel so triumphant! This car is my baby so it feels good to have him running nicely again
- Aint rolling anywhere...
- This is a truck in the US. Left says passing side right says suicide
- What can I use to remove all this?
- Rathin thtripes
- Started overheating on the highway after the customer pressure washed his bike. Smart.
- Exhaust leak from manifold. 72 jeep DJ-5. Rusted screws. Any way I can seal this up?
- 600 miles on the build and a knocking noise develops. Guess I did something wrong.
- Blursed_Alloy
- Treads? Who needs them.
- A workshop full of engineers and they fix it with a spoon.
- Whats wrong with this picture?
- Everything is OK with brakes, he said. Something wrong with the tire.
- Sh*t! Rokkercover bolt broke off while using correct torque wrench.
- Guaranteed to fit rotors might be the wrong size...
- The way the ice formed while driving in the cold.
- I cant tell if this is shitty or a work of art
- We tried selling an alignment twice to this customer, and they declined, but 3rd times the charm.
- 1970 SS Chevelle w/ cowl induction and 454 big block
- Actually drove this one into the shop
- Can you identify this flag?
- Zip ties can fix anything, right?
- Sighting of the rare Unicorn Tire in its natural habitat.
- This starter pinion cover at my shop reminded me of a super stoked turtle.
- Monster Energy hubcaps
- Is there more purpose for this beyond decoration? I almost felt uncomfortable parking next to this car.
- Truck bed shed
- The shadow from my truck makes it look like a wind up toy.
- I don’t know what he did but he looks awfully guilty.
- How do i clean this? Any ideas?
- This was in the parking lot in the Peterson auto museum as a display with a few other tv and movie cars
- Who the fuck thinks its a good idea to design it so you have to remove a control arm to do brakes?
- French wiring
- Customer: I think I have a nail in my tire, it keeps going flat. Me: Well the good news is your tire is fine, buuuuuut....
- It was a shitty idea on the 2.7 lets put it on the new 3.5
- Wonder who he voted for
- Bmw x5 sport
- How do you even roll a car like this?
- Fashioned myself a new screwdriver holder.
- For those who asked what can happen when the neck is not secured right. This is a smaller roll that completely broke you can see the inside of the neck on the right.
- Nothing to see here
- Yo dawg we heard you liked tow trucks
- 2013 Audi S6, hit a pothole and nearly cracked the wheel in half.
- Thats a new one...
- Am I a terrible person for being so happy about this being someone elses problem?
- Thats not normal
- Toasted Marshmallow Paint Job Is Really HOT This Year.
- Cant be bothered disassembling or masking.
- Broken fly wheel, again.
- So this was parked near the pediatric hospital today :/
- C’mon man.
- So steel stitches are a thing?
- Cs/ I dont want new tires
A Before & After on just how powerful our YumWheel formula is. The most advanced wheel cleaner and safest on the market. #detailing #autodetailing #detailersofinstagram #detailingworld #carwash #carcare #cardetailing #ceramiccoating #paintcorrection #detailer #cars #car #paintprotection #coating #detail #mobiledetailing #detailingaddicts #salonmobil #detailinglife #detailingcars #auto #clean #rupes #details #m #detailers #nanoceramic #bhfyp - @yumcars_cyprus on Instagram
- Forbidden Spaghetti
- classy fender flare
- How do I get this nut off? Do I have to unbend the metal?
- Looks like they made a mistake the first time they drilled the holes. Also looks like they used drywall plugs....
- Collision Repair
When you havent got much clearance, the extra teeth on GEARWRENCH 120XP makes a difference! Only requires 3 degree of swing arc @wadpunch working on his #mitsubishidelica #myGEARWRENCHtools #GEARWRENCH #ForgeAhead - @gearwrench on Instagram
- Anyone missing their flathead???
- C/S I have to keep adding air
- Found the source of the noise I get whenever I turn left hard 😅. Thankfully screws are a way weaker metal than chains.
So, Im normally not the type of person to post pics of the things I work on. But, this week I had some baller advice from my homie @kanekid on some MIG/fabrication work for some upgrades on @the_diesel_dave El Camino here at @sparks_motors . Ive never really ran a lot of wire before mainly because I was always running a TIG torch on S.S. or aluminum. I feel like Ive picked up on some of RKs shared knowledge and wanted to throw this pic out there to give him credit for all his help. Thanks bro. I really appreciate all your advice. - @j_land3132 on Instagram
- Our 6 month old tire exploded on our way home.
- What is this thing? Belongs to a company that does stuff underground.
- Open bay netting. Whats that?
- Budget lowering kit.
- Fixed the car door boss (PS its a mini bus and yes it drove like that in the street )
- Just towed in. Drivers probably gonna be shitting seat fabric for a week
- Seen at the Grocery Store
- Whats up with these two trends
- D(e)tination is right.
- The impact streaks on this old forklift
- What does that say?
- Homemade spring compressor
- Just rolled out of the shop. Ford dealership offered me a $4/hr pay hike. See ya firestone!
- When the smell of weed and cologne fills the whole shop.
- An engineer that we dont have to kill in their sleep!
- (Maybe hard to tell) This truck is not straight with the lift.
- A cone stuck to the wheels on the bus
- Rear differential broke down after we reached the Salt Flats. Been stuck in Wendover, Utah (ugh) two nights. Mechanic is having trouble finding the part and we might have to stay another night. We ran out of water and need to do laundry badly. First breakdown and I feel like crying.
- What causes rotor & pad streaks?
- Terrible Photo- Lotus Europa in the wild, new owner taking delivery I believe.
- My brakes squeak.
- Old one I found on my phone..this is an oil pan. Car was towed in not running, would not turn over.
- How to repair a leaking valve stem.
- Day in the life of a tire tech
- C/S he wants a new wheel seal
- how much metal in oil is too much?
- Just one more
- C/S Loud noise when going over bumps
- C/S tire has a slow leak... Somehow its still holding air!
- Custom tray built around the tyre. Hopefully he doesnt get a flat
- Lifted xj
- What does doing this to your tailpipe accomplish? I didnt get a good look but I think it had been done on both sides.
- It never leaks and dont worry about bumps I put a chain on it.
- Customers states: tire loosing air. Lube tech cant find leak so dismounted tire for dunk tank.
- My 1999 Jeep Grand Cherokee was knocking and unsure why, I think I found the problem. Pushrod came out of the rocker. I’m not sure if this fixed it or not, I’ll update once I’m done.
- And the customer was wondering why his bead keeps leaking...
- It would be great if someone sold boots with metal heel covers to save big feet having idiots like myself.
- Yeah, I see all that. Can you fix it or not?
- Someone thinks hes in a chariot race
- blursed_suspension
- Never seen this method before...
- Found the leak!
- I lifted this car on 3 arms by accident.
- Got those high performance drums.
- Just buffed my 1963 Plymouth valiant today. Back half is buffed and waxed front half is just washed. Not too bad for sitting under a tree for 30+ years
- Just DIDNT roll into the shop...
- Not the usual rice you see here but still pretty shitty
- Is there any hope for this? Brand new and just got a drywall screw in them.
- Saw this awesome tow rig in South Carolina today.
- Owner tried to fix coolant leak
- These fetishes are getting out of control
