- Downscaled my home lab from a rack to a tower
- Bored during quarantine server
- One of my guys got so mad I was having this redone that he quit
- R O Y A L [album in comments]
- My version of Rift + stereo webcams
- [RelicsOfThePast] Dual Socket Athlon (A7M266-D) motherboard.
- 2015 GMC Sierra 1500. Struck by lightning through the antenna and fried every module in the truck. Here’s the BCM. Insurance co. is having us replace every computer in it. I can see a lifetime of electrical problems ahead.
- I was wondering where all the thermal pads on the RAM went.
- Dumped the firmware off a GE smart wall oven. Its a BeagleBone black clone running Yocto and NodeJS.
- Got a shipment of chairs for the employee break room
- I have power!
- For anyone who got emotionally scarred by my last post here, I tried to fixed it (more or less)
- 16 yr old teaches himself Docker and builds awesome RPi Docker Swarm
- Changed some fans around, noticed something a little sideways...
- Part II of custom Raspberry Pi cooler
- Rtx on baby!
- Boss gave us these 10Gb cards. Now what to do with them?
- Handmade 2 channel LED strip dimmer with colour temperature adjustment (MQTT, Wi-Fi)
- Should I touch it?
- So I just figured out why nothing has worked properly in our office for the last few months.
- Power MacIntosh 7600/132
- Finally bit the bullet recently and replaced the wireless chip in my gamepad. Fun but scary tinkering! Got to see the gamepads guts :O
- You have probably heard about curved Monitors, but have you heard about curved ram?
- Oh no...
- Audio monitor bronze 2, does anyone know what this allen key does?
- New setup. Pretty boring by the standards of this sub but Im pleased with it.
- Water cooling
- Arduino Nano v3 controller for a home made maple syrup vacuum releaser. Picture of the machine in the comments.
- Pfsense not recognizing Intel NIC?
- Well with over 500TB of spinner storage, time to add some all flash storage. Soon to be filled with 24x 500gb SSDs for VM/HPC storage.
- You wouldnt believe how much fucking spaghetti I can fit in this bad boy!
- My new lab at work. Looks humble but I got two store rooms of stock. Photos to come✌️
- The smallest 4 CPU board ever produced - Tyan S4980G2NR - powered by 4 Opteron 8360 SEs
- I got that $300 switch I wanted
- Heres my messy rear ;). Dont judge.
- No balance charger? No problem...
- 6 Month Server Build
- Where to Colo my 1st 1u?
- Pi3 Car Display Hack Followup
- I too have 384GB of RAM :)
- Network layer
- UI
- Lab update: UPS installed and got my old ProLiant in the cabinet
- Wife asked me to put in order my network closet.. I think I might have taken her too seriously.. (work still in progress)
- Network layer
- Got my power cleaned up and dressed in.
- Satisfying cable management
- Anet A8
- First part of 10gbit upgrade: complete! Cablemanagement: missing.
- Ancient thermal paste I found on a 90s PC.
- Dual purpose networking and washing line
- 🏡💡Project Building my own Smart Home. Controlling the different electronic devices and open the door by phone with a simple gesture or a voice command
- I present to you... shelf lab 1.0. It took forever to figure out how to get rid of the unicorn puke from the CPU fan
- Rookie at soldering, dont know if I made a mistake or not. Please help
- My 2006 EU focus mk2 has a fusebox that is not shown in the manual or online. Help??
- The Home Lab under the stairs!
- Playdate - AKA lets see what a REAL enterprise firewall is capable of
- I’ve found so many weird things in optical drives. A kids flosser definitely unique.
- Room for another 2U. What should I build?
- Nozzle clogging at the same height 3 times in a row, is there a fix?
- OKdo let me order five Raspberry Pi 4s, so I did.
- Update, not bad for a two month old
- My New Simulation Homelab (upgrading the CPUs)
- Built a potato pc with my father in quarantine.. Established a tech relationship with my dad... :)
- HUS130 - AKA new Datahorder setup - aaaand Im stuck
- Well I got a hold of the schools 3D Printer. Of course I had to print a Gavin Belson signature edition logo for my server.
- Seems like my computer made a cool house
- I heard you guys like (retro) nudes
- Dual forge blower ready for use. I am heading to print over 150mm/s with these. (already can print these speeds but small pieces wont cool properly)
- Built this at work today and it is never NOT a pleasure!!
- R710 is getting there!
- Alright, Im lost. Can anyone who has experience with soarers conversion give advice?
- Finally properly homed my homelab
- Looking for a new server to consolidate R610 X5675 & G7 X5550, what would you recommend, also how much would I be able to get for each server? I want to keep my ram for next server, have 96GB in R610 and 28GB in G7
- Its upgrade day bois!!
- Hello pcmr, Im a relatively new PC enthusiast and I picked this system up for a good price, I need some help with how to remove this connecter
- This is what’s inside of a Xbox 360
- For Four LONG years during my dinner services I have had to cross the kitchen to a double door reach in for all of my proteins, and tons of other mise. Two months in a row of 28% food cost later: It is the Dawn of a new Era
- Day 1 with my new Homelab. Starts out messy. (Long time lurker)
- Clean components are happy components.
- My tiny homelab, Fujitsu Esprimo pfsense, HP Gen8 32TB NAS, powered by 1000/1000 fiber internet
- [Teaser][CaseMod] Watercooled Ryzen 2xxx in a review box (dry fit)... it will be the Pinnacle achievement of my PC history.
- I finally got a micro hdmi adapter for my raspberry pi only to find out it just barely blocks the usb-c power port.
- My little lab - still more work to do in the office.
- I see your 7 drive Lenovo and raise you what I call mrESXY... A 7 drive, M910 SFF ESX server
- Network and security
- I love how perfectly this PCI-E cable runs!
- Raspis evil twin brother the orange pi. If your time is valueless and your budget low its a decent offering and i plan to buy another boatload of them for some playing around. This one is the pc+ which may be a bit deprecated running armbian. Anyone else play around with these?
- I always forget which GPIO pin is which, and what leg of an LED is ground, so I made a laser-cut mounting board for the Raspberry Pi that tells me which GPIO pin is which, and what leg of an LED is ground!
- I got issues
- Re-wired my rack (again), because I’m OCD and. . .
- Nice network.
- Anybody else water cooling their dual socket Xeons?
- Todays haul 2 x R510s E5620, 16gb and 8 X 300gb drives each
- Pepsi gets ready for a game night
- Helpful labeling
- New Switch! (And some other labporn)
- hmmm
- Motherboard died after it shutdown during a BIOS update at 82%. RIP
- £42 delivered. new DL165 G7. Lovely!
- Just arrived and I wanted to share
- Out of place and bastard colour in my server room....
- was gonna put Firepro S9300X2...
- It doesnt work properly.
- I did a thing today.
- Forbidden watermelon
- Prototype of intel optane memory
- Two of the server racks at work. Moving to a new building soon and hopefully I can help set up at the new place to clean it up.
- The start of a journey.. :)
- Godmode: My Wolverine PC case mod!
- Anyone else’s lab got full plumbing? I’m trying to figure out best way to set up a console in front of the throne 😂
- Merry Christmas everyone! Santa brought me vintage blacks, hope your dreams come true 😁
- Helped my friend rejoin the master race today.
- Since you all seem to enjoy FrankUnRaid, here is the inside. 4 more drives to be added once the Drobo finishes copying over.
- Workes on my cable management. Still not entirely sure what to do with the rats nest by the PSU.
- They said they upgraded the ram but couldn’t put it back in.
- No matter how hard I try, I can’t get it in. I’ve bent the things to the point where it shouldn’t interfere with the insertion but it still won’t line up with the standoffs. Tips?
- While building my new second server in a 4U Rosewill case, I came up with an easy way to cool any controller cards with just a 120mm fan and 4 zip ties. :)
- Laptop runs too hot. Yeah no wonder
- Just a few cables
- First new equipment finally, after a year in business
- My NOT DEAD Vega 56, still sexy as ever, now 15C cooler!
- Where were going, we dont need traces.
- built my first pc, hope you all like it
- Overheating Access Point
- Almost There!
- Water damaged ATM receipt printer circuit board due to sideways rain.
- Warming up my Mac and cheese
- I saw many scrappy cases, so here’s my cigar box.
- A very tense half hour with a hairdryer prising this oem backplate off a SuperMicro motherboard (future NAS build)
- My 4G router - using a Raspberry Pi
- 10G master plan slowly falling into place. (More info in comments)
- Need help identifying this control board
- Homeserver on the cheap - aka you got to love Supermicro
- This entered the shop because an LED was always turned on... incredibly the blown IC kinda worked
- My college lab
- My wife spilled water (actually moscato) on it, but it still works.
- So, this hasnt had a cover on it for a while. Charger for our power jacks.
- PSA: If you dont have an iDRAC installed, an SFF-8088 connector will perfectly fit through the hole in an R710!
- Got a nice lot of stuff from my schools IT department. Time to see if any of it still works!
- What an underground homelab becomes.
- It was overheating. He said he saw a video that said he should change out the “gel”. So of course he removed the thermal paste altogether, partially reassembled it and just raped that screw.
- Playing with my new server today. Sorted the DL380 for £115 inc delivery.
- Call today. Hi my PC wont boot...
- When you need a serial cable, but you are beyond buying serial cables
- Hey guys, I got my AMD CPU running on an Intel chipset
- Cables, Cables, Cables
- No full height bracket? No problem!
- Couldnt find a big enough flash drive so Im installing windows from my drone.
- [Photos]Does anyone know what these 3 extra pins are used for where the USB connects on my tg3?
- It ain’t much, but it’s my first (NAS). Specs in comment.
- Finally upgraded my NAS box. It’s been a while.
- AMD has their epyc server on display at VMworld currently
- Ram or something idk I dont have a pc
- Anyone know what this gpu is? Just pulled it out of my grandpas 2007 asus desktop.
- Gotta start somewhere!
- Lga 2011 motherboard with new dual board technology!
- The start of something beautiful.
- 480 volt panel. Customer said oh, the breaker keeps tripping.
- My little setup. Please ignore the cabling, Im going to tidy it up soon.
- A closet with power distro taped shut during huge auto show in convention center
- Cleaned 10 years of dust off of my dads old stereo reciever
- Patching upgrade
- Just bought my first piece of server equipment! Cant play with it yet though...
- “No, it didn’t get wet”
- I made external Hdd support. File is on Thingsiverse
- Router & Switch
- Even messy it it still looks pretty good.
- Data took a dump on port 3
- I think this is why my ram slot does not work properly.
- Cable management masterpiece
- Left work today content😊
- Segmenting my lab into mini-labs, compact but powerful!
- Still love my job 30yrs on!
- 3800x build ! Finished !!!!! Ouf
- No, seriously, what is this thing? Weve had it for a while, but we dont know where it came from, or what it came from. Any idea what this board could be for?
- Almost done with my Lab! R710, R610, RPIs and a bunch of Cisco on a Lack Rack.
- Decided to change things up a bit.
- Forbidden rice
- How do I install an M.2 SSD in the Asus B450M-A?? Neither the motherboard box nor the SSD came with any screws...
- Really proud of my monster. I7-9700k | gtx1080 | 16gb ram
- Last time I posted, I was told to fill up the drive bays - getting there!
- Winter Re-Rack
- PC wont boot. No, but that ant colony sure is warm.
- You think, too much voltage?!
- You guys like it?
- I finally got a rack, now time to go bankrupt again...
- Finally did a writeup w/ some photos!
- Installed a UPS and got rid of Automation Hubs
- My ‘Data Shed’ Setup
- Homelab 2.0.WasMine
- All the cables are ziptied to each other
- Rate my setup
- New home lab
- Am I doing this right pt2
- LAN-Party setup we’ve been using
- It may not have RGB or the latest hardware, but I think my quarantine rebuild turned out pretty good
- Update, acquired a R230 for a good deal! Still need to get a patch panel.
- My 100amp Tig weld 10 minutes old
- My power-efficient homelab on a small budget
- Retired the Dell PowerEdge 860s
- Everyones 3D printing caddies and Im just here screwing hard drives into any space theyll fit...
- Is there anything usefull I can use in my build from my uncles old pc
- Cleaned up the rack a little.
- Science isnt about why, its about why not! (recent addition to my comp!)
- Are we still posting smoking spots? Here’s mine
- Dont you love flooded vehicles
- I need your help with managing this shit. Ive thought of throwing out all my current cables and buying new ones but Im not sure. What do you think I should do?
- Just installed ethernet ports, first time crimping cables.
- Customer had this for 6 months
- A Students messy Homelab!
- If that falls, youre so fucked
- Never worked on a hinge opening laptop before
- Dog hair inside my electric panel
- Network Upgrade - Birthday
- A students messy homelab v2, now with a rack!
- Adding a little tree makes it faster correct?
- Homelab, Help! What did I just buy?
- posting this cuz I hate yall
- Upgraded LAN Party setup
- Am I doing this right?
- Bit of a mess at the moment but Ive added 3d printing to my homelabs capabilities.
- Front and Back
- My lab. Wife approved because the cabinet is her favorite colour. More details to comments.
- Slowly adding more electronics to the base of my cnc. Made a mental note for future me as well.
- Upgraded from my Lack Rack to a proper APC Netshelter 3100 42U Server Rack. Had to add RGB so it would go faster!
- New addition to the rack
- No 240V plug? No problem.
- So uh anyone know where I can find schematics for a Dell PSU?
- Hate me and my dirt cheap SATA controllers. :)
- Good bye my trusty lack rack. Hello custom built
- Custom PC case complete
- Frankenbox
- If you liked my last post, check this out. I prefer how this one looks.
- Decided to clean out the microserver after 4 years of 24/7 use... NSFDH
- Goodbye my Ole beast
- Showing off my setup. Dell R710 12-core 2.9ghz, 192 GB ram, 36TB Dell Storage Array, Ubiquity Security Gateway, Ubiquity 48 Port Switch, 1500va UPS. Running VMWare ESXi with 8 vms. Rack cabinet is from Tripplite and side mounted 12U.
- Finished my Carvey + Gmax 2 Enclosure
- I promised that I would post an update once I had everything reracked. Im late, but here it is!
- Programming
- Everything is second hand, but its mine and I am so proud of it. Im studying up for the A+ and hopefully going to be working in tech within the next few months. 32 years old and still learning. Definitely need to learn some cable management though.
- My home network
- House network
- Humble, but Mine! Finally got everything racked after moving, cable management is less than to be desired..
- Setup done.. For now!
- Zenith - My dual-socket XP gaming rig
- I thought you guys would appreciate my messy, 10x DVD ripping machine I made out of an old DVD duplicator!
- Server Room
- Intact abandoned server
- Cable managment
- Still have some work to do/wiring to clean up, but do I have a homelab yet?
- The shipment for my case, PSU ans AIO got delayed by a week. City boys make do.
- Finally got the homelab up and running.
- Rack is slowly getting there - cant wait to add the Synology expansion unit to fit that empty space!
- It’s not much, but it’s a start.
- Careful in there, it might zap you.
- Might have enough switching/routing equipment now. Maybe.
- Follow Up Post
- Build my own Frankenrouter.
- Boss wanted 30 PCs imaged in 4 hours
- A almost finished homelab! (Minus FW)
- Out with the old...
- $100 - 5 Sata Port - Glusterfs Node using Espressobin
- You all loved the switch last week, figured I’d post the server restack I had to do to make room for the additional UPS it’s gonna require.
- Operating System Choice
- Final Form LAN Party Setup and LAB
- The blue color heat tempering from my welder
- Re-wired my rack + Rpi Server Cluster
- This is the *totally legitimate* rOOmLab, unlike my homelab, the traits are reversed...
- Network and security
- Needs a paint job and mountable equipment, but Im finally on the road to having a homelab.
- It’s loaded and heading home! Time for the Great Migration!
- Its getting there! Basement datacenter 2.0. More pics in the comments
- My first attempt at building a PC. I spent most of my time in cable management. Followed LinusTechTips guide and ran it as a testbench first and it worked on first boot :) I was sooo happy.
- I did a thing! (Basement Lack Lab, aka BlubLab)
- 200TB Glusterfs Odroid HC2 Build
- Did a pre-move down-sizing. Very happy with the result.
- My Humble Network/Home Lab Setup
- It begins
- A two-post closet rack with some Unifi kit
- I thought you guys would like to see this, triple 9800 GTX+, waiting on a SLI bridge that fits!
- Computers & Office
- Structured Wiring
- Wife went on vacation.... I bought some stuff for the new lab... it seems to be stuck in the livingroom.
- The 10G upgrade to the lab is complete.
- Even welding beads are always perfect.
- My Latest Build - Radeon-V
- A little board (SM X10SDV) in a big case (SM SC486). I think he needs some company.
- Helping a friend firing up his homelab!
- Its SO Beautiful! [Satisfying to See The Organization]
- Home lab with custom rack
- Thinking about replacing my IBM System X3650 M3 with a Fujitsu SERVER Primergy RX300 S8. What do you think? My IBM has a dual X3650 cpu with 24GB RAM, 5.7TB storage. The Fujitsu’s config: E5-2630 64GB RAM 10.8TB HDD.
- Weekend rebuilt, dam fun times!
- Cables, Cables, Cables
- Starting to fill my network closet!
- My Life’s Work (Write-up in Comments)
- My first lab 3
- Finally my homelab in a rack
- Home Automation
- Layer 3 SFP+ switch suggestions...
